How to paint the walls with your own roller. What roller is better to paint the ceiling and walls with water-based paint

If you need to paint a large area, it is better to use a roller. How to paint with a roller correctly will be discussed in this article. Working with this tool is both easier and faster than with a regular brush. In addition, the quality of the painted surface is much higher. The range of rollers is very large, they are available in different widths (from 10 to 30 cm) and with different handle lengths. If you need to paint the walls, it is better to choose a roller on a long handle. The same tool can be used to paint the floor in hard to reach places. The size of the roller directly depends on the type of surface to be painted.

Roller selection

The roller is a cylindrical roller rotating around an axis, which is fixed on the handle. A special material that is removable is wound around the cylinder. Rollers of different sizes and with different materials — woolen fabric, polymeric material, faux or natural fur — can be attached to one grip-holder.

The following types of rollers are distinguished:

• With a short faux pile;
• With fur coating;
• Universal fur rollers;
• With foam coating;
• With embossed patterns and patterns.

Roller of any type should be of high quality, as it has a direct effect on painted surfaces. If there is a need to increase the working area, then you can additionally purchase a rod with a screw handle and a high-quality replaceable nozzle. A well-chosen nozzle reduces paint consumption. If you plan to paint smooth surfaces, do you use a roller with a half-inch-long pile, and for coarser surfaces (for example, putty walls, painted wallpapers, textured plaster, textured ceilings, etc.) do I use a roller with a pile length? inches. For semi-gloss paints, you can use rollers with any pile.

As for the paint tank, it is recommended to use not a paint tray, but a large bucket with a hinged grid for draining excess paint. Such a container is more convenient because it is more stable and more paint is placed in it. Small trays for paint can come in handy if you need to carry out a small painting, for example, to draw a contour.

In addition to the roller itself, it will be necessary to stock up with brushes, since it is not very convenient to paint the joints of the walls with the ceiling and the floor with the roller, as well as the corners and places near the batteries. Brushes should be of different sizes and good quality, otherwise their pile will fall out and remain on the paint.

Roller painting

To get a beautiful and unique apartment design, the walls are painted. This work is not difficult, but even very pleasant in execution. To achieve a quality result, you need to know how to properly paint the walls with a roller.

The paint roller paints the wall more evenly than a brush.

Wall painting technology

Required:

• roller;
• bath;
• brush;
• paint.

Before you begin, you need to prepare all the necessary tools. Depending on the achievement of the effect of painting, it is chosen which roller to paint the walls with. A high-quality fur roller is used to apply an even basic layer, and a fabric roller is used to obtain marble stains. Also, to work, you need a special bath, one of the sides of which has a ribbed surface to remove excess paint. If there is no such device, then squeezing nets can be made, for example, from a piece of plywood, on which holes (12-15 mm) are drilled in a checkerboard pattern with a pitch of 20 mm.

How to paint the walls to get a uniformly painted surface? First, with a brush, places inaccessible to the roller are carefully painted over, i.e. corners of walls, near skirting boards, etc. Then the roller is lowered into the paint and rolled to spin. To paint the walls you need to start from the side on which the window or doorways are located. Work should be carried out sequentially step by step, starting from the edges. Apply paint to the wall with a roller, you need to roll them all over its height from top to bottom, back and a little diagonally. In this case, the next strip must be necessarily superimposed on the edge of the previous strip by 4-5 cm. To make the painted surface uniform, the paint should be well shaded, cleaning the joints between the strips. As necessary, you can apply it in two layers. On walls with a small area, you can first paint with a brush, shade it well, and then roll it with a roller.

In order for the roller to serve for a long time, it is necessary to care for it. After each use, the remains of the primer or oil paint are carefully removed from it. After painting, the roller should first be washed in a solvent, and then in water with soap. After using the primer, it can simply be washed in soapy water.

Back to the table of contents

Decorative painting of walls with a roller

Required:

• fabric roller;
• primer;
• paint;
• acrylic emulsion.

How to paint the walls to get a marble effect? To do this, use a roller made of pleated fabric. Thanks to them, unpainted areas remain, and a mottled surface is obtained. In this case, the paint is applied in two shades: the first for the main background, and the second for the marble effect. Walls painted in light colors look very beautiful, on which brighter paint is structurally applied.

Before painting, a surface is prepared with which the dust is first cleaned and then the primer is applied.

After that, you need to paint the walls with the main background. When the first coat dries, then if necessary, you can apply another. To apply the structural layer with a fabric roller, one mixes: a matte water-based paint and acrylic pearlescent emulsion in a 1: 1 ratio. The prepared composition is applied to the walls, starting from the top. In this case, you need to move the roller in different directions. When painting the surface, special attention is paid to the corners and places above the skirting boards. To paint them, you need to moisten a lint-free cloth in paint and use it to apply smears to unpainted areas, simulating the resulting stains.

When performing a roll of fabric, you need to know that when applying one layer through it, the main color will be perfectly visible. And if you often draw the tool over the surface, the result will be a more saturated and dense structure. To achieve the desired effect, work is carried out in small areas. As with any other tool, the fabric roller should be looked after. After each painting, it is thoroughly washed. The dirt and cobwebs adhered to it are removed using the sticky side of the masking tape.

Independent repair work is not such a complicated process as it seems at the beginning. But there are some nuances, as in solving any other issues. Wall painting should be given special attention. The roller is used precisely at this stage. The tool is indispensable for all DIY work. Let's try to figure out how to properly paint the walls with a roller, and what the tool should be.

Varieties of Rollers

It is necessary to study the characteristics of the tools in advance, and then there are fewer problems with the choice, because these products can not be called universal. They are of the following types:

• With foam. A great option if varnishes, adhesives are applied. The only drawback is the ability to wear out quickly. It is better to use the tool when the canvases are processed.

• Fur They are characterized by good absorbency. Almost all paint remains on the surface to be treated. As a result, we get a uniform layer, devoid of smudges, unpleasant drops. Combine with any colors. On the basis, fibers from such rollers may remain.

• Velor Also combined with all types of paints. Contribute to the formation of smooth and beautiful layers that have no roughness. But then this variety is able to absorb a large amount of material. Therefore, it is not always suitable for those who are interested in how to paint with a roller.

• Thread or polyamide.  Such rollers are made of fabrics stitched with special threads. Ideal for covering walls with any kind of material. It is convenient and simple to work with such tools, they will achieve the desired result. The main thing is to be careful not to spatter. Then it will be easy to figure out how to paint the walls with a roller.

When choosing a tool, you need to conduct a thorough visual inspection. The presence of fibers and protruding threads on the surface is unacceptable. If you choose fur products, then the longer the pile - the better. The ideal solution for wallpaper with deep patterns, or walls with bumps. A short pile is permissible if you have to process walls in which everything is smooth.

But you need to consider not only the variety of material. No less important factor is the width of the roller. 30 centimeters is the best option for use in urban apartments. If the roller has an increased width, then with further work difficulties arise. For it, you will need to take diluted paint in large quantities, and the process itself will become more complicated.

It is recommended to purchase not only a roller, but also additional accessories to it. For example, the process is facilitated by the extension handle. Or a special grater - it helps get rid of residual material.

The use of rollers for the coloring material allows you to get the following advantages:

1. Processing large areas in a short time. The quality of the finished surface pleases customers for many years.
2. Compared to a brush, a roller is a more convenient and pleasant tool for continuous use.
3. Connecting a long handle. During the execution of work, this will allow you to stay on the floor.

But the device also has small flaws. They also need to be remembered for those who care about how to paint with a roller correctly.

1. Inconvenient processing of joints and corners. Then the brushes do better.
2. Some varieties absorb too much paint. In this case, a special spin device will help.

Surface preparation for painting

The following devices must be purchased before starting repairs:

• Tray for paint.

• Paper masking tape. It is needed to provide additional protection.

• Emery bar. It is used in the case of manual grinding of coatings.

• The rollers themselves, with different sizes and reliefs.

After purchasing everything you need, the following actions are performed:

1. We remove the curtains.
2. We move the furniture in the middle of the room, close it with polyethylene film.
3. Special covers also help in the implementation of such work.
4. Skirting boards and other similar interior elements are also protected from paint. For this, masking tape was needed. The material is cheap, and it can bring a lot of benefits. Paint the walls with a roller will be effective.

We close the floors, doors and windows with a plastic film. Additionally, the film itself is fixed with masking tape.

1. Turn off the electrical power.
2. We remove the covers on the switches and sockets, protecting the surface of electrical appliances from paints.
3. Using masking tape, we cover the surface of electrical appliances.
4. Temporarily remove the heating radiators.

The valves in the system must be completely shut off. In the place of supply of pipes it is necessary to put a tray to protect against water on the floor. The cap hooks connecting the radiator to the pipes are completely unscrewed, and the water goes down. The radiator must be removed from the brackets responsible for its retention. It remains only to pour the rest of the liquid. Paint roller wall finished.

The old top layer from the wall must be removed, with which a regular spatula helps. The surface will become smooth if you clean it with sandpaper. This part is not performed if the walls on which the wallpaper is applied are processed. In this case, a preliminary primer of the surface is sufficient.

In addition, a set of actions will be required to align the walls, as well as eliminate various defects:

1. Fill plaster cracks with plaster or putty. Take a small spatula with a flat shape.
2. Emery paper with grit sizes up to 120 helps level the surface when materials dry.
3. Sponge or frequent rags are used when it is necessary to remove dust and dirt from the surface.
4. The floor will only be vacuumed. We figured out how to paint the walls.

In proper condition, it is necessary to bring not only the walls themselves, but also the roller with which they are processed.

If a fur roller is selected, then several steps will be required when painting the walls:

1. Soak the instrument in soapy water for three hours.
2. We use running water for thorough washing.
3. Dry the device.

With this preparation, you don’t have to worry about the appearance of villi on the surface. They simply will not fall out of the tool. It is easy to apply the material with a roller without streaks.

On the video: painting the walls in two rollers.

About roller painting technology

1. A small amount of paint is poured into a special bath.
2. The roller itself is dipped into this bath.
3. The roller is rolled along the grid, or along the corrugations that the bath is supplied with. Then the paint will be evenly distributed throughout the tool. The action is performed several times.
4. It is required to determine where to start processing and in which direction to move.
5. The best option for starting work is the corner of the room located at the window.
6. The movement is carried out on any of the existing parties.

The main thing is not to press the tool too much.  The entire surface must be painted evenly so that empty gaps appear. The movements are performed smoothly, only in this case the stated result is achieved. First, the roller is from top to bottom, and then in the reverse order. Paint is applied in several layers if you want to get saturated colors. In this case, subsequent layers are applied only after the previous ones have dried. Then the painted object looks beautiful.

The corners should be painted over with a brush, it is never possible to completely cover them with material using a roller.

The basics of painting walls with a roller (21 photos)

Apartment Repair

Long, even structures, which include walls or a ceiling, are best painted on their own using a standard roller. Our industry produces rollers of various dimensions and structures. On sale there are rollers with a working surface width of five to thirty centimeters. In addition, they differ in the size of the handle. You need to choose the right size given the task at hand. So, for example, for painting walls, more often, they buy a roller with more elongated handles. However, it is more important to perform a successful selection of a “fur coat” for the roller.

How to paint the ceiling

Roller for ceilings  You need to choose according to several parameters. Most often, the roller for the ceiling has a relatively small or medium handle, compared with the roller for painting walls. The conditions for the quality of painting the ceiling surface are often elevated, as a result of this, the roller must be carefully selected. Most often, for painting ceilings, a tool with a slightly elongated, not rigid pile is used. Preference should be given to natural pile, for example, from real wool. A very short pile will absorb a small amount of paint. You can use a foam roller for the ceiling, but this is not an ideal option: it is able to create “bubbles”.

How to paint the ceiling  and walls

The colorful composition absorbed into the roller is unnecessary to be rolled out immediately on the ceiling surface, as this can lead to uneven distribution of the layer. First you need to roll it on a pre-prepared piece or other similar basis. As, which you can use the painter's tray, if the dimensions of the tool are not very large.

How to paint the walls with a roller

Before starting the selection of the roller for painting walls, you must choose the type of paint coating. The type of tool itself will depend on this choice. For example, it is easy to work with water-based paints foam roller. It can also be used to work with different water-adhesive solutions (,). However, it is not advisable to work with emulsion formulations with such a roller. Foam rollers are one of the cheapest options. Their main disadvantage is the short service life. In addition, they splash heavily during intense work.

Which roller is better?

Rollers with thread, velor and fur surfaces are perfect for applying different types of paints, even those that have an organic base. These fabrics take a fairly small amount of paint, distribute it evenly to the working area, do not form splashes and stains.

During painting work, the main thing is that the paint layer on the wall is the same thickness. They do a great job with this. In addition, they paint well on various wall flaws (small roughnesses, cracks, potholes, crevices). The disadvantages of fur rollers include their feature of "shedding", forgetting the "villi" on the painted area. Usually, low-cost tools “sin” this.

They have properties identical to fur. However, they are able to form an even more even coating. After using them, the paint layer looks perfect. This type of roller is used in critical areas when painting wall structures. There is an opinion that this is a tool for professional craftsmen. If a beginner paints a roller from velor, all the flaws are visible on the surface. In addition, this roller is good for applying varnishes.

It is good when speed is prioritized rather than the quality of the painting (for example, if the work area has a very extensive perimeter). During its use, you must not forget that a very intense rotation of the drum can contribute to the appearance of splashes. As a result, it is better not to rush. A filament roller creates an interesting texture on a painted surface.

We select a roller for painting walls: pile size

There is a principle: the worse the quality of the wall surface, the longer the pile of the roller is selected. With a large pile, there must be an instrument with which they are going to paint the textured wall (for example, or wallpaper with texture). Pile of large length can perfectly paint different potholes, indentations, cracks. For smooth walls you need a roller with a small pile! Remember: if you begin to use a roller with a long pile on a flat wall, smudges will form.

Aqueous emulsion paint is widely used for indoor work - for covering walls, floors, and ceilings. It belongs to the family of water dispersion paints and has many advantages: it does not have a pungent odor, is non-toxic, persistent, retains color for a long time, and dries quickly. The composition includes water, polymers and colored pigments. You can add pigments of any shades to the solution, mix them in different proportions  and get a unique original color. Since the most convenient tool for applying paint to flat surfaces is a roller, builders are interested in what roller to paint the ceiling water-based paintas well as walls and floors. The quality of the final result may depend on the choice of the roller, so you need to understand well which roller is needed for water-based paint in each specific case.

Types of water emulsion

The type of coating you prefer also depends on which roller to paint the walls with water-based paint. There are several types of paint: acrylic, silicone, silicate and mineral.

The first variety is the most popular. In its composition - acrylic resins, latex is sometimes added. The surface painted with an acrylic coating is not afraid of moisture, it can be washed without worrying that the paint will soon be worn off.

Silicone paints are based on silicone resins. They successfully cope with closing cracks up to 2 mm. They are also used for surfaces that are exposed to frequent moisture. If you carefully coat the paint with a paint roller for water-based paint on a damp wall, it will help to overcome fungus and mold. The cost of such paint is above average.

A distinctive component of silicate water emulsion is colored glass. This variety is widely used for outdoor work. The paint lays well on brick, concrete, cement, plaster and protects the walls from adverse external influences.

Mineral paints of the water-dispersive type are composed of either cement or calcium hydroxide. It is perfect for painting ceilings and walls, but its service life is limited compared to other types.

What are the rollers

After you have decided on a water-based emulsion, it is time to choose which roller to paint the walls with water-based paint. Why exactly the roller? Of course, you can use an alternative - a brush or spray. But applying the first tools will take much more time, and will look less aesthetically pleasing - even on a perfectly smooth surface it is difficult to apply a brush without obvious strokes and smudges. The second option, of course, is practical and convenient, but it is not always possible to spend money on such an expensive device.

On the shelves of building stores are represented paint rollers for water-based paints made of such materials: foam rubber, pile, velor, polyamide. Prices for them do not differ so much. Therefore, you might think that they are no different. But each species has its own characteristics during operation. Before deciding which roller is best for water-based paint, it is worth understanding the properties of each.

Foam rubber or pile

Foam tools are well suited for applying varnish coatings and glue. However, when deciding which roller for water-based paint to choose, it is better not to buy foam. He quickly absorbs paint, moreover, it flows abundantly and drips from the tool. A foam roller is short-lived and will quickly lose its initial properties.

A pile tool can be used for painting with any kind of coating. There are rollers with short, medium and long nap. It is best with the application of a water emulsion device to cope with a medium-length villi. Short ones absorb an insufficient amount of paint, and long ones, respectively, a lot. You need to be especially careful when choosing which roller is best to paint the ceiling with water-based paint. If you take a wide instrument with a long pile, it will be nourished by the mixture and will become heavy. When painting the ceiling, you need to raise your hands all the time, and holding such a load, they will get tired several times faster. Thus, thinking about which roller is best for water-based paint, buy a medium-length pile device. But be careful: during the process of painting, villi may remain on the surface. Carefully remove them immediately, otherwise they will dry out.

Velor and polyamide tools

Velor perfectly resists the effects of particularly aggressive components of paints, varnishes and solvents. It is equally good to use with different types  coatings, therefore, when deciding how to paint the ceiling with a water-based paint, you can safely take such a tool. There are no significant shortcomings in the roller, but there is characteristic feature  - they will often have to be lowered into a container with an aqueous emulsion, because they quickly absorb the mixture.

Polyamide rollers are made of textiles by flashing a small pillow with thread. Professional painters are very fond of them, because polyamide rollers are durable and can be used for applying any paints, varnishes, enamels. Such a tool can be safely bought as a roller for water-based paint for walls. Note that you should paint with such a device very carefully and carefully, otherwise the paint will scatter in different directions.

To summarize, which roller is better to paint the walls with water-based paint: you can take fluffy with medium villi, polyamide or velor. When deciding how to paint the ceiling with a water-based paint, give preference to these same types. But keep in mind that velor quickly absorbs paint, and lowering your hands to the container and raising it many times, you see, is very tiring.

General rules for choosing a roller

In spite of the fact that you have chosen the paint roller for painting the ceiling with water-based paint, you need to thoroughly check it in the store, because no one is safe from poor purchases. So, first of all, inspect the tool. The pad should be uniform, the villi and threads should not stick out in different directions, and there should not be any cracks on the handle. Seams on the cushion good roller  will be almost invisible, not too embossed. Squeeze the pillow firmly with your hand - after you release it, it should return to its original form. Following these simple rules, you can choose a high-quality roller for water-based paint for ceilings and walls.