How to decorate cars for a wedding. DIY wedding decorations on the car. How to decorate a car for a wedding with ribbons, flowers, balloons, bows, tulle, hearts, rings: photo. How to decorate a wedding car with fresh flowers

When it comes to decorating wedding cars, the first thing that comes to mind for newlyweds is to hang balloons, wedding rings and artificial flowers on the cars. This is due to the fact that this method is the most popular, but that is why it should not be used, because such cars rarely look really beautiful.

It is better to choose a fabric decor that will look restrained and sophisticated, hinting that the newlyweds took the time and put their imagination to create it. Satin or tulle ribbons for a wedding car are most widespread, because of their appearance, which is in good harmony with the theme of the holiday.

There are many ways to use satin ribbons to decorate a car, it all depends on the style in which the wedding is organized, so you must first decide which places will be decorated, and then choose the most suitable colors.

1. On the hood, place one or two slanting tapes that go from the radiator grille to the side mirrors. Depending on the additional decor in the form of figures or rings, the machine can look both strict and elegant, as well as cute or romantic.
2. On side mirrors or car handles - small ribbons of different colors will look good there.
3. On the roof of the car, around the figures with the newlyweds or rings.
4. On the trunk and rear bumper: very nice if the ends of the bands flutter freely. But at the same time, it is necessary to monitor their length so that they do not interfere with other road users.

Decorations from ribbons for cars of newlyweds and bystanders, as well as guests, are different.

For the newlyweds, they make a pair or mirror decor - so that it is immediately clear that these are the cars that are taking the bride and groom.

For witnesses, the width or number of fabrics is less, there are no other decorative elements, only flower arrangements are allowed.

And for the rest of the guests, it is necessary to make a completely neutral harness for the hood or fluttering ribbons.

How to make a ribbon on a wedding car with your own hands - a master class

Often, newlyweds do not want to spend money on wedding decoration of cars, because such decorations will be needed only once, and then they will gather dust.

Now for newlyweds it has ceased to be such a difficulty, because you can rent a ribbon harness - the choice of wedding agencies is quite large. The only drawback is that this decoration has visited many weddings, and if the appearance has remained good, then it cannot be called unique for sure.

Therefore, if the groom, the bride or the organizers of the holiday want to get an inexpensive but exclusive decoration for the wedding procession, then you can create it with your own hands. To make decorative elements from ribbons, you need to know which car the newlyweds will drive. After all, the size of the hood and body differs from model to model.

If the exact parameters are not known, then you will have to make ribbons with a margin, and cut off the excess on the day of the decoration.

Necessary materials:

• 8 m ribbons 10 cm wide, or 2 multi-colored ribbons 5 cm each;
• sewing machine;
• ball pen;
• 3 m of fabric tape, contrasting to the main piece of material, 1–1.5 cm wide;
• 3 elastic bands 1 cm wide and 10 cm long;
• scissors;
• sewing thread.

First, you need to fasten an elastic band to the main tape, which will hold the decoration on the hood, as in the photo.

To do this, apply 1–2 cm of stretch to the end of the fabric and pass it back and forth with a sewing machine several times.

The middle should be marked on the decorative tape. To do this, fold it in half, and if possible, gently hold it with a pen. A decorative ribbon is applied to the fasteners, which will go along the entire length of the decoration, and also sewn.

When all the preparatory stages are ready, waves begin to form.

To do this, retreat 3 cm from the edge and pinch the main fabric. It should rise above the surface by about 1–2 cm. After that, the top is placed towards itself and the decorative tape is smoothed from above. Now you can sew on.

For the formation of the next wave, it is necessary that from the top of the previous one to the bottom of the next one should be the same length as the height of the wave. Then the whole ribbon will turn out to be uniform and beautiful.

Continue folding and sewing until they reach the middle of the decorative tape. There you need to change the order of folding and bend the waves away from you. After that, they also continue to sew further until 3-4 cm remain until the end of the tape, in which it is necessary to attach an elastic band and fasten the entire structure.

It is important that there is correct indentation in the middle. It must be doubled, so that up to the mark on each side there is one regular segment of empty space.

When the entire tape is stitched, the last elastic band is tied in the middle of it, which will attach the jewelry to the radiator. Sometimes bows, flowers or figures are installed at this place, for which more powerful fasteners are needed, from a silk tie 2 cm wide.

After everything is stitched and tied, the tape can be installed on the hood. It will diverge from the radiator grille towards the side mirrors.

If you want to make the tape multi-colored, then the same actions are performed with pieces of fabric previously stitched together.

How to attach a tape to a machine - easy ways

In addition, in order to select or create decorations, they must also be fixed to the machine. This is a very important stage in the preparation of the wedding cortege, because all decor must be securely installed.

If this is not done, the most harmless thing that can happen is that he will simply fall into the road. But even this case with three-dimensional figures can be dangerous. Newlyweds need to be more careful with ribbons or cloth, because a piece of cloth that has flown away from the car can hit the windshield behind the driving car, which will provoke a loss of control and an accident.

How can the tapes be secured:

1. The easiest way is to attach small ribbons to the mirrors or handles of the car, you can also decorate the rear wiper with them. It is enough just to tie them tightly, or to fasten them with a stapler for greater reliability. This is especially true when the ribbons are holding onto another decorative element.
2. The second most difficult thing is attaching the tapes to the hood. To do this, you just need to lift the cover and fix the ends of the tape next to the windshield. If there are projections on the inside and the ability to fix the elastic, then this is done immediately, without closing the lid. If not, then the ribbon is threaded through the radiator grill and tied tight, while it is important to cut or hide the ends under the decor so that they do not spoil the appearance.
3. If the tape is light and passed over a large area of \u200b\u200bthe car, so that it does not get carried away, both ends are rigidly fixed. When one of the ends must be left free, strips of double-sided tape are used along the entire length of the tape.

Before using any of the methods, you need to make sure that the pieces of fabric do not get into moving or heating parts of the car. If you are going to use scotch tape, then you need to check in an inconspicuous place how it is cleaned, whether it leaves behind stains on the paint.

Tulle jewelry

If the newlyweds want a more airy texture from the fabric, then tulle is ideal. It is translucent, which is why it can be stacked in several layers, which will help to make more emphasis in places.

Fatin can act as the main means for car decoration, or be just a pleasant addition - it all depends on the imagination of the newlyweds.

How to decorate a car with tulle:

1. Place a strip of fabric on the hood, securing it at the top and bottom. Due to the fact that the material does not wrinkle and keeps its shape, it is most often laid in small folds. It looks most advantageous when decorators used two tulle colors, which stand out most strongly against the background of the car paint.
2. A voluminous tulle bow placed on the roof or the rear of the car looks beautiful. It is also made of fabric in two shades, and is complemented by a satin ribbon running along the entire length of the roof. In order to make it look more advantageous, a bouquet of voluminous artificial inflorescences is installed in the core.
3. If all the decorations on the hood are made of other materials or are small in size, then you can beautifully decorate the side doors with tulle. The material is so thin that it adheres well and does not harm the rubber gaskets on the door. But in order for everything to look very unusual, it is necessary to create small bows of satin or tulle, which will be strung one by one on each strip. If possible, you can use a more sophisticated version - special buckles.
4. Use small tulle ribbons fixed obliquely to the hood, and special stickers or magnets are applied to the side surfaces. A white car, decorated with burgundy abstract patterns and ribbons of the same color, looks very unusual.

When only tulle is used, there is no need for an additional lining to protect the paint.

But if there are other, harder materials, then care should be taken to create a protective screen that will not be visible under the main decorative element. To do this, you can use a piece of thick cloth or a polyethylene backing that is sold in hardware stores.

This video will show you how you can sew a wedding ribbon on your own car:

Decorating cars with ribbons or fabric is no longer considered a luxury - it is a common and beautiful way to inform other road users that the newlyweds are traveling inside. In addition, such cars cheer up everyone who sees them, so it is important to pay attention to even such an insignificant point of the program. How would you decorate the back of your wedding car?

A wedding is a costly event, so many try to unload the budget by doing something with their own hands. For example, make decorations for a wedding car. We offer examples of jewelry and tips for creating and fixing them.

DIY wedding rings on the car, ideas

Option 1

Material:

• Plastic pipe
• Artificial flowers
• Foam plate
• Golden ribbons (decorative tape golden) or fabric
• Satin ribbons
• Thread, needle, scissors
• Scotch
• Base fabric

Working process:

1. Cut the corrugated pipe in two. Make two rings, securing the pipe sections with tape.
2. Wrap the surface with tape to remove any irregularities from the surface.
3. Decorate the top with golden decorative tape or golden ribbon. In the absence of tape, golden fabric will do.
4. Secure the rings together with tape. Place it on a polystyrene plinth, making small holes in it and stretching the ribbons through them.
5. Cover the foam support with a beautiful fabric, sew.
6. Pull the satin wide ribbons under the foam and rings, tie in the place where they are fastened to the foam. With these tapes, the structure will be fixed to the car.
7. Decorate the rings with flowers and other decorations. Cut off the stems of the flowers and insert into the foam. Secure with a glue gun to prevent the flowers from being blown away.
8. You can insert neodymium magnets into the foam for a more secure hold on the machine.

Option 2

1. Take the wire, glue it with paper, which you secure with tape (for volume).
2. Cover the top with a shiny golden cloth, attach to the foam or foam frame.
3. To attach to the car, attach tapes to the frame.

How to make a decoration for a wedding car, ideas with a photo

Butterflies on suction cups

Hats

Material:

• Whatman paper - 3 sheets
• PVA glue
• Glue gun
• Hat fabric
• White tape - 3 meters
• Cardboard
• Newspaper
• Thick ribbon

Working process:

1. Cut out two circles from a drawing paper, 37 and 26 cm in diameter, leave a margin for fastening. Fasten the two remaining pieces of whatman paper together in the form of a tube using a glue gun. Attach the circles that will be the top and bottom of the hat.
2. Dissolve PVA glue with water, pick up newspaper finely. Soak it in the solution and stick it on the base, like papier-mâché. Let dry for 24 hours.
3. Sew a cover from the fabric, cutting out a circle 28 cm in diameter, then two strips, one 12 cm wide and 1.5 m long, the second according to the shape of our base, slightly letting it down on the seams. Sew the body first, then add the circle. Sew the edges of the circle carefully.
4. Glue the cover to the base.
5. Decorate the hat with ribbons.
6. Attach special magnets or suction cups to your hat to prevent it from falling off the car.

Bow

1. Take tulle (large amount), tie randomly to make a large bow. Can be tied with a ribbon. Decorate as you like.
2. Tape it to the car.

Decorating a wedding car with flowers, ideas with an explanation

Flowers on suction cups

1. Buy artificial flowers in the store, cut the stems if necessary.
2. Attach suction cups or special magnets to the flowers for attaching to the car.

flower composition

Material:

• Artificial flowers, leaves
• Tulle or mesh
• Ribbons
• Cardboard
• Scotch

Working process:

1. Frame the cardboard composition by cutting out a circle.
2. Fix the flowers on it by inserting decorative greenery and tulle envelopes between the flowers.
3. Fix everything with tape and decorate with a tulle skirt.
4. Attach the composition to the car with tape, or pull the tape through the frame and pull it tightly around the hood.

Decoration of flowers and tulle

Material:

• Fatin
• Artificial flowers
• Ribbons
• Scissors
• Elastic underwear
• Glue gun

Working process:

1. Cut a strip of tulle 25 cm wide.
2. Cut three 30cm pieces of linen elastic to secure the jewelry.
3. Tie the elastic bands to the ends of the tulle.
4. Cut several pieces of green ribbon, tie on the fabric at regular intervals.
5. Use a glue gun to attach the fake flowers to the areas that are tied with ribbons.

Wedding car decoration with ribbons, ideas with photos

Ribbon and flowers

1. Purchase a tape that is two bonnet lengths and 5 cm wide.
2. Pull it through the V-shaped radiator grille, secure it under the hood with a clothesline or tape.
3. Sew artificial flowers onto the ribbon. You can make flowers or organza bows yourself.
4. Tie pieces of tape between flowers so that they flutter when traveling.

Fluffy ribbon

1. Sew an elastic band to the tape and gather it a little to make the tape "accordion" for pomp.
2. Attach to the hood by adding some other decorative element (balls, stickers).

Heart made of paper napkins on ribbons

1. Cut a blank out of cardboard - a heart, as well as a 6 cm strip. Bend the strip in half.
   
2. On one side of the fold, cut the cardboard with scissors, attach this strip to the heart with adhesive tape.
   
3. Take a folded napkin and cut out a circle. Fix the middle with a stapler.
   
4. Straighten each layer of the napkin with your fingers to make a flower.
   
5. Glue the roses to the base, fix the base on two tapes.
   

Decorations on the hood of the car, ideas with photos

Decorations on the handles of wedding cars, ideas with photos

Decorations on the mirror of wedding cars, photo

How to attach jewelry to a wedding car

1. On the roof. Attach massive jewelry to suction cups and ribbons. Tie the ribbons under the roof of the car; they are also held by the side axles of the doors. Attach the decoration to additional ribbons, which should be attached under the hood of the car. Suction cups should be present on the bottom of the decoration for stability.
2. Decorations on mirrors. Attached with elastic bands or strings. Decorations should not cover mirrors so as not to obstruct the driver's view.
3. Radiator decorations. Tied with strings.
4. To the rear window. Attached with suction cups.
5. Hood mesh and tape. Secured with special tapes under the hood.
6. Small lightweight bonnet decorations (flowers, butterflies) are attached using special neodymium magnets or suction cups.

DIY wedding car decoration video

The main thing in car decorations is a reliable fastening. Consider weather conditions such as rain and wind. Be safe by securing heavy jewelry not only with ribbons, but also with additional suction cups or magnets.

Read our tips and see photos to beautifully decorate your wedding car with your own hands. The cortege is the face of the wedding, a common background for memorable pictures, its “outfit” should be as good as the suits of the bride and groom.

There are many ways to decorate a car for a wedding: ribbons, flowers, bows, stuffed animals, stickers, balloons, ornaments cut from cardboard or paper are used. We will describe all the methods in detail below, but now - five main tips that will come in handy if you do everything yourself.

1. The more compact the decoration, the less risk it will be blown away by the wind and the less effort you need to spend to fix it. It is better to make the decorations wider and shorter.

2. It is important that the decor of the wedding car, a special one, the main car in which the bride and groom sit, match the chosen colors of the celebration. The photo below shows that the ribbons decorating the cars are matched to the ribbons that decorate the wedding hall.

Photo: @SAM Cheong - flickr.com

3. When creating jewelry for a wedding car with your own hands, it is important not to overdo it and observe a sense of proportion and taste. Eyes run up from a large number of details, as a result, the decor of the car as in the photo below looks tasteless.

Photo: @Geoff Stearns - flickr.com

4. It is desirable that all the cars of the wedding convoy be decorated in the same style. All cars, except for the main one, can be decorated in exactly the same way. This is not a contest “Who better decorate the car”, but a wedding, so everyone should obey the same idea. But it is not necessary that everything be the same: you can use, for example, ribbons of the same color, or tie ribbons of different colors in the same way.

Photo: @ 斯克爾 影像 館 - flickr.com

5. Consider the color and style of the car. If we are talking about a flashy car, for example, a rare retro car, then the decorations should be minimal, the car itself will attract attention. When it comes to color, contrast is important. Decorations of almost any color are suitable for a white car. On a dark background, pale colors will be lost, especially if the decorations are small.

Photo: @Mack Male - flickr.com

How to decorate a car for a wedding with balloons

Oddly enough, making a beautiful decoration from balloons is quite difficult, you need to show imagination. Bundles of balls on mirrors look boring and trite. Either ribbons and compositions from small round balloons of different colors look interesting, or compositions from balloons and other elements, as in the photo below.

Photo: @Jeremy Weate - flickr.com

In order to make a composition of balls, for example, animal figures or flowers, you will need a special pump, balls of different shapes and some dexterity. The video shows how to decorate a wedding car with your own hands with balloons in the shape of double hearts.

This video shows how to make a lamb and a lamb from the balls. Cars are often decorated with soft toys, but balls are rarely made of figures - a great opportunity to stand out. Sheep will be especially relevant at weddings in 2015, which is the year of the sheep.

Ball shapes have one important advantage: they are easy to attach to a car using magnets or double-sided tape.

How to decorate a wedding car with fresh flowers

Fresh flowers are a classic of the genre, such decor always looks solemn and bright. There is only one drawback - nowadays fresh flowers are expensive.

Photo: @Jakob Montrasio - flickr.com

But there are many variations of floral decorations. Some are economical and do not require expensive colors. An original and rather economical option for decorating a car is shown in the photo below - this is a flower "skirt".

Photo: @Cristiano Betta - flickr.com

A good idea is shown in the photo - you can decorate a car for a wedding with flowers from the inside: the decor is clearly visible, it will not be blown away by the wind, besides, the car's interior smells great without any "Christmas trees".

Photo: @Andrew - flickr.com

Another economical, but bright option: few flowers are used, but it looks interesting - like a cake decorated around the edges with cream. It is important that a contrasting combination of car colors and decor is used.

Photo: @David Schroeter - flickr.com

Typically, floral decorations are combined with fabric decor. This helps, on the one hand, to diversify the decorations, and, on the other hand, to save floral material. Here is an example of a classic flower and ribbon decoration:

Photo: @Connie Ma - flickr.com

How to decorate a wedding car with tulle

It is quite simple to make tulle jewelry for the car with your own hands - it is a light mesh fabric, from which ribbons and lush volumetric bows are usually made. The video below shows how to make beautiful pom-poms out of tulle, which, in combination with ribbons and flowers, will be an excellent decoration for a bride and groom's car.

You can decorate a car for a wedding with ribbons made of satin and other fabrics. Artificial bouquets made of fabric look interesting: this is an original, stylish and also budget solution.

​
Photo: @Steven Isaacson - flickr.com

It is important that ribbons and other decorations do not obstruct the driver's view. They are usually fixed under the hood of the car. It is also convenient to use double-sided tape: it can leave traces of glue on the car, but they can be easily washed off with warm water.

How beautiful to decorate a wedding car with your own hands: photo

There are many ways to decorate a car for a wedding in an original way. This is especially important if the wedding is themed. However, for a classic celebration you will have to try. Much depends on the car itself: if we are talking about a deliberately cheap car, it is worth decorating it as ridiculous and fun as possible. For example, here is an unusual car for the bride and groom. SpongeBob is fortunate!

Photo: @Alexander Lyubavin - flickr.com

With sophisticated and expensive cars, comic decor usually looks bad. However, cute decorations like stuffed bears or figures of the bride and groom are fine.

Photo: @Greengirl 24 - flickr.com

Floral jewelry is a classic, but you can make it very unusual by using rare flowers. Sunflowers, as in the photo below, for example, are far from every day, while the decoration turns out to be sunny and joyful.

Photo: @KeWynn Lee - flickr.com

The photo shows what can be done using only scissors and paper. Option for a Hawaiian themed wedding.

Photo: @ilovebutter - flickr.com

In fact, you can create a lot of interesting decorations using self-adhesive paper in different colors and textures. For example, place silhouettes of the bride and groom, hearts, pigeons and other symbolic figures on the hood. True, you have to tinker to remove this decor.

The decoration does not have to be very bright and catchy to be beautiful and original. See the photo below for a good example. True, the car itself is important here, not its decor.

Photo: @anna Hanks - flickr.com

The heart is a classic car decoration for a wedding. You can make it more original by adding figures of the bride and groom.

Photo: @Calbee Chen - flickr.com

Such decoration is placed either on the radiator grill or on the hood.

Photo: @CMY Kane - flickr.com

Most agencies that provide transport for a wedding offer to include in the rental price the original car decoration by professional florists and designers.

As a rule, this is quite an expensive pleasure.

Therefore, if you have a share of imagination and a creative approach, you can cope on your own.

1. Check with the transport company if it is possible to decorate the rented car, as sometimes it is forbidden to do this due to the high cost of car cover.
2. Try to choose cars in the same color scheme for the wedding procession, so that when driving along the street they represent a harmonious line.
3. For cars with bright colors, it is preferable to choose calm and non-defiant colors in the design.
4. One of the traditional design decisions is that light accessories look perfect against a dark background and vice versa.
5. Observe symmetry in order to create a cohesive ensemble.
6. Take care of the practicality of fasteners and parts, as it can be unsafe to disconnect them while driving.

If you follow these simple rules, then you are ensured not only outwardly pleasant car design, but also its reliability.

Flower arrangements

Natural and artificial flowers are a great option for decorating a wedding car, as they look especially romantic and festive.
To decorate a car with flowers you will need:

• A variety of plants and compositions from them, which should be ordered in advance in a florist shop.
• specialized fasteners for suction cups;
• multi-colored dense satin ribbons;
• braid or elastic band;
• boutonnieres.

When decorating a car with fresh flowers, do not forget that their freshness depends on weather conditions. Therefore, ask the florists to treat them with special compounds before picking them up from the store.

First of all, start decorating the hood... First, choose the largest flower arrangement that you plan to focus on. Attach it in the middle or diagonally across the hood.

Sew an elastic band or braid to the ribbons so that they fit snugly on the machine parts... Place an odd number of straps on one side of the trunk.

Also you can tie bows on the protruding parts. Decorate the handles with boutonnieres (how to make them yourself), but at the same time, make sure that the fasteners are reliable.

On the roof of a car or a radiator grill, two rings made of small fresh flowers will look spectacular.

The approximate cost of decorating a car with flowers can vary from 4000 to 7000 thousand rubles... It depends on the variety of colors and the number of decorative elements.

Balloons

The most economical option for a wedding car decoration is balloons... The stationery market offers many shapes, colors and quality materials.
If your choice fell on balls, then prepare in advance:

• garlands of balloons (helium, colored, glowing);
• thin and elastic band;
• car tape.

Be sure to pay attention to the quality of the latex the balloons are made of. The denser it is, the better.

Choose no more than four colors, as otherwise the decor will look ridiculous and unattractive.

The garlands are attached to the roof, and individual balls are tied to the car handles using a braid... Additionally, you can run a tape over the hood or attach a fabric heart to the trunk.

The advantages of decorating a car with balloons are in a cost that will not exceed 3000 rubles.

Toys

Creative design of wedding cars is a trend of the last 10 years. For romantic people, favorite toys are ideal as accessories.

Traditionally, porcelain dolls of the bride and groom or teddy bears serve as the center of the composition..
Fastening to the radiator grille is made by means of wide bands and elastic wire.

Pull a transparent net over the hood of the car, on which you place postcards made using the scrapbooking technique. Write memorable dates or wishes for each other inside each card.

Photos

Photos from your personal archive will be great accessories when you decorate your car. It looks original and requires a minimum of preparation.
The following is required:

• high-quality photographs of different sizes (color or black and white);
• acrylic varnish for covering paper;
• medium sized brushes;
• car tape;
• threads with large beads.

Think ahead about the location of the picturesto be placed on the hood. They can be round, square or heart-shaped.

Photos are glued to vehicle tape around the entire perimeter. In order to keep their appearance for a long time, you should pre-treat each image with acrylic varnish and leave it to dry completely.

On the roof of the car, fasten the threads with large beads tightly, thanks to which you can create a unique pattern.

Photo decoration requires minimal costs, since the most important decor elements are stored in your photo album.

The cortege is an integral part of the wedding ceremony. If invitation cards are a visiting card for invited guests, then a line of wedding cars is a visiting card for everyone who sees it. The most beautiful, of course, should be the car in which the newlyweds will go. They usually decorate it last and in a hurry. And it would not hurt to approach this matter with all responsibility. A master class on decorating a car with your own hands for a wedding will help you quickly understand this matter.

Economical and simple

The most economical and easiest way out is balloons.

To do this, you need to buy balloons, inflate them and fasten them in the desired composition using beautiful ribbons. The balls can be grouped into pyramids and garlands, shaped into hearts and rings - it depends on the number of balls and on the imagination of those who decorate the car.

Note! You need to fasten them tightly, otherwise, with fast movement, you can lose the whole outfit.

Space for imagination

The most common way to decorate a car for a wedding is with cloth and bows.

Two fabric colors on the hood are a good solution:

Sew one big bow:

Make a heart out of fabric:

Assemble fabric and ribbons into assembly:

There are a lot of options.

In order not to be reputed to be devoid of taste, you need to remember: if a large bow is made, then it should be one. There may be several small ones.

Ideally, all the cars of the wedding cortege should be decorated in the same style. If there is a huge bow on the car of the bride and groom, then the rest should also have reduced copies of the main decoration.

Bright flowers

Decorating wedding cars with flowers is considered to be the highest priority.