What are the early signs of pregnancy. When is the best time to get tested ...
Beeline Television - this is the ability to view television channels transmitted over network cable... To implement it, you need access to the Internet through a home network router and the installation of a special set-top box - a device for decoding a digital signal and controlling Beeline television channels.
The list of TV channels transmitted to subscribers consists of a package of paid and free programs. The set of paid programs package depends on the selected tariff plan. List free channels Beeline television, that is, programs available for viewing even with financial blocking, consists of the first federal multiplex and two TV shopping channels.
To receive digital television, you need tv box Beeline... All Beeline TV set-top boxes are stitched for this provider and work only on its network. Models of set-top boxes differ in the presence of various audio and video outputs: RCA, Component, Compossite, S-video, SCART, Optical, HDMI.
The Pace 8005 TV set-top box has the ability to connect to a TV via a high-frequency antenna input. Pace 8005, unlike other set-top boxes connected to a computer network via an Ethernet connector, also has the ability to connect via a Coaxial coaxial cable.
In a number of models of Beeline set-top boxes, a hard disk drive with a capacity of 120 to 500 GB is installed, which allows you to record and then play a television program from the air.
The set-top boxes offered by the campaign for watching Beeline television, their characteristics and differences, are summarized in the table.
| Recording | HDD | HDTV | 3D | Video outputs | |
|---|---|---|---|---|---|
| Cisco 430 | Yes | 320 GB | Yes | Not | |
| Cisco 2001 | Not | - | Yes | Not | HDMI, SCART, RCA (tulips), Optical |
| Cisco 2200 | Not | - | Yes | Not | HDMI, SCART, RCA (tulips), Optical |
| Cisco 2230 | Yes | 350 GB | Yes | Not | |
| Cisco 7031 | Yes | 160 GB | Yes | HDMI, S-Video, Component, CompositeOptical | |
| Motorola 1002e | Not | - | Yes | Not | HDMI, SCART, S-Video, RCA (tulips), Optical |
| Motorola 1200 | Not | - | Yes | HDMI, SCART (TV), SCART (VCR), S-Video, RCA (tulips), Optical | |
| Motorola 1216 | Yes | 120 GB | Yes | Yes | HDMI, SCART (TV), SCART (VCR, S-Video, RCA (tulips), Optical |
| Pace 8005 | Yes | 500 GB | Yes | Not | HDMI, Rf out, Coaxial inComponent, CompositeOptical |
First of all, you need to connect the Beeline set-top box to a 220V outlet using the adapter included in the kit.
Using the included patch cord, connect one of the outputs of the Beeline home network router to the input of the TV set-top box.
If the set-top box is connected correctly, a green indicator on its front panel will light up.
Connect your TV box to your TV. It is best to use an HDMI cable that delivers the best picture and sound quality.
It is necessary to configure the Beeline TV set-top box to play a high-quality image: press the Menu button on the remote control, then select Settings, Format and set the value to at least HDTV 720p.
Remote control for television Beeline
Symbols and location on the Beeline TV remote control buttons.
- 1 - Programming the Beeline remote control
- 2 - Selection of the monitored device
- 3 - Fast rewind
- 4 - Recording
- 5 - Stop
- 6 - Repeat a fragment (7sec)
- 7 - Quick jump to the video directory
- 8 - Displaying the TV Menu
- 9 - Go to the previous menu item
- 10 - Exit TV Menu
- 11 - Displaying a TV program on the screen
- 12 - Volume
- 13 - Mute sound
- 14 - Scaling the image to fit the TV screen
- 15 - Fast switching between current and previous channels
- 16 - Switch channels or Menu pages
- 17 - Go to information pages
- 18 - Navigating the Menu, calling the Picture in Picture function
- 19 - Entering the selected menu item
- 20 - Quick jump to the Recording section
- 21 - Skip fragment (30 sec)
- 22 - Pause
- 23 - Start viewing records
- 24 - Fast forward
- 25 - On / Off
Digital TV Beeline
To plug digital television Beelinein an apartment using the provider's networks, this means connecting an IPTV television (television over the Internet protocol). To do this, you need a digital receiver - a beeline TV set-top box, which will connect directly to the global network. This means that digital television beeline requires Internet access in the apartment.
When connecting Beeline digital television, subscribers are provided with a set-top box for rent. A pleasant bonus for owners of game consoles will be the opportunity to watch digital television Beeline on the gaming xBox prefix 360.
Beeline home television
Home made with the help of IP-television technology, thanks to which it becomes possible to transmit television images over a computer network. For the beeline television to work, it is necessary that a Beeline computer network be held at your entrance. If you already use the "Home Internet" service, then you can additionally connect digital television beeline. To connect home television beeline TV and a computer, you must:
Turn on the switch and the beeline TV set-top box to the power grid.
Insert the connector of the provider's cable into the apartment into the Line port of the switch.
Connect the patch cords included in the installation kit to the free connectors of the switch. After completing these steps, the indicators of the connected ports should light up on the front panel of the beeline TV set-top box.
Connect one cable to the computer and the other to the TV box.
Turn on the TV, if the connection is correct, a green light will light up in the button on the front panel.
Beeline TV
Digital TV Beeline is a high definition television (HDTV) and quality. A large number of additional useful functions such as: pause, rewind TV, program 2 weeks ahead, record 4 channels simultaneously. And also well-known and ranked first in Russia (in terms of quality and number of connected subscribers) cellular Beeline.Beeline Moscow tariffs
And just recently, Beeline introduced new packages: Family, Family +, Super Family, Super Family +. Connections to all "All in One" services at once (Beeline mobile communications for your whole family, Beeline home Internet and home tv beeline). In this package "All in one" home Internet and TV Beeline is available for free!And most importantly, this is not a promotion! These are constant tariffs from the leading provider of Beeline!
Important connection home internet and TV provider Beeline Moscow free of charge and in a short time. You can find out all the details from the official representative of Beeline in Moscow, on our website or by phone
(Click on the image to enlarge)
1. TV set-top box Beeline TV with decoding of buttons. It is useful for subscribers who are looking for information and want to set up Beeline TV. I'll make a reservation right away, this manual (manual) is written for those who first picked up the remote control from the Motorola console
2.
To see which package is currently connected, change the package of Beeline channels or add additional channel packages, click the button Menu, then press To the right Down scroll to Channel packages and press the button OK. 
You can see the available channel packages on the screen, navigating with the buttons Up down according to the menu, select the channel package you are interested in and press the button OK... Now you can view information about the package or connect the required channel package by selecting it and pressing the button OK.
3. Viewing the account status of Beeline TV. In order to see the status of your personal account, you need to press the button Menu, then press To the right follow to the position "", then with the key Down scroll to "Account balance"
Next, select with the keys Up down"Account balance" and click OK button.If you are connected + to, then the account status will be displayed as a single balance, for example, like mine. Here you can pay with a VISA card directly through the attachment or see the personal account number and pay in any convenient way.
4. Interactive services Beeline TV.This is not just cable TV, it is interactive digital TV. It has Yandex weather, exchange rates, exact date and time; watching video from Rutube; social networks Facebook, Twitter, Vkontakte, Odnoklassniki; sea \u200b\u200bbattle game; sports news from Rambler.
All this can be used with the remote control directly on your TV screen. Push Menuand key To the rightto the position "Interactive". Select the service you need with the keys Up down and press OK.
5. Recording of TV programs.There are several ways to record programs. For example, just by clicking the button Recording on the remote control during the broadcast. In this case, the program will be recorded from the very beginning, provided that you watch it first and did not switch the channel while watching, otherwise from the moment you press the key Recording... This was the first way.
You can also schedule a recording of the TV show, which will be tomorrow or in a week (up to two weeks in advance). You can also schedule a cycle of TV programs, suppose recording a series, each episode of which will be recorded automatically. For example, "Kvartirny Vopros" on NTV, will be recorded on the hard drive of the Beeline set-top box every Sunday at 12 noon, regardless of whether you are watching another channel or even your TV was turned off.
6. Scheduling the recording.To schedule a recording, you need to enter the menu by pressing the button Menu, scroll with the key To the rightto point Recordingand scroll with the key Downto the item "Configure recording". Push OKand start planning the recording of the program you need using the navigation buttons (Up, Down, Right, Left) 
Choose navigation buttons desired menu item and press OK 
Using the same principle, select the desired gear and program the entry with the key OK. If you did everything correctly, the inscription "Recording is scheduled" will appear 
7. Changing recording parameters.To cancel recording or edit the recording parameters, enter the Scheduled menu 
Find a scheduled recording.
the entry you want to delete or edit with H aviation buttons and select it with the button OK 
Now you can delete a scheduled recording, adjust the recording parameters, record everything (meaning all programs with this name that will be broadcast in the future, for example, either record one episode of a series or record all episodes)
8. Viewing recorded TV programs.Go to the menu, use the navigation keys to select "View recordings" 
Select the entry you want and press OK
9. Channel settings.With Beeline TV, you can tune the channels you need in the desired sequence. Go to the menu and select "Settings" 
Tune Channels Mark the desired channels with Navigation keysand 
click OKon the item "Save", now you can make sure that when scrolling through the channels are displayed in the order you want, for this select the item "Arrange" 
Use the navigation keys to move through the channel list and
click OK on the arrow indicating the direction where you want to move this channel.
10. TV programis right in the menu of your TV, you don't need to buy it at the kiosk, you don't need to search the Internet. Go to the set-top box menu and select "TV program" 
A description of the program can be viewed directly from the TV program.
(movie), set up recording. To do this, move through the menu Navigation keys,select the desired gear with the key OK 
Here you can see
information about actors, description, customize recording.
11. Prefix settings.The settings menu allows you to customize the aspect ratio for your TV, customize the soundtrack for navigating through the menu, adjust the audio transmission format, select the style of the TV program and much more. Those who have reached this point of the article will figure out the settings for a couple of times.
12. Parental lock.You can block access to children to view the channels you do not want by setting a password on the channel. How to do this is described in a separate article.
That's all, I tried to briefly and meaningfully talk about the main opportunities in Saratov. There is a setup video here. Leave questions and comments in the comments. Connect your friends and acquaintances at a discount and with your benefit.
Lesson 1.
Lesson 2.
That's all for today guys))
The use of Beeline remotes can be extremely convenient, but even the most reliable devices can sometimes fail. Therefore, in order not to be deprived of the opportunity to enjoy their favorite TV shows and watch interesting series and programs, viewers should know how the Beeline remote control is configured correctly.
To understand the above procedure, it is enough to take a closer look at the type of equipment purchased and the PU model, to understand the peculiarities of the operation and settings of the equipment, and to make several trial attempts to configure the set-top box. As a result, even if the first approaches are unsuccessful, the user will be able to achieve a positive outcome and regain control of the TV. And when the next equipment malfunction occurs, if it happens unexpectedly, it will be much easier to cope with difficulties.
Getting started setting up the PU, you should pay close attention to several features:
- the model of the remote control and the possibility of its interaction with various consoles, for example, Motorola;
- prefix model (for similar reasons);
- code, if required (found in the instructions on about page 20);
- the ability to automatically search for the correct code.
Additionally, you will need to decide whether to reset the hardware parameters to the factory level. Such actions may be necessary if problems arise and serious mistakes are made. But it is much safer to immediately show vigilance and circumspection, not allowing yourself inaccurate movements and rash button presses.
How to reset the Beeline remote control settings?
The first step is to find out how the Beeline remote control settings are reset to the factory level. This process contains the following steps:
- the first step is to press the STB key;
- then you have to press the Setup button and wait for the indicator to blink twice;
- press numbers 9, 7 and 7 alternately;
- wait for the STB button to blink four times.
The last signal means that the desired goal has been achieved and the parameters are reset to factory settings. In the absence of the indicated reaction of the technique, you should repeat the described procedure or contact the consultants of the cellular company by calling the contact service phone.
Setting up the Beeline TV Motorola remote control
To manually tune the remote control to the TV, you need to specify in advance the code that is used for the existing model and type of equipment. The instruction in Russian, attached to each set of equipment, will allow you to choose the correct option or offer the viewer to choose one of several options suitable for the purchased set-top box. Knowing the code, it remains:
- turn on all devices;
- press the Set and Aux or Set and TV buttons until the corresponding indicator lights up;
- enter the selected digital code;
- press the active, highlighted button.
After completing the process, it is worth checking to make sure that the PU and the TV interact correctly. If there are problems, you will have to repeat all the above steps using a different combination.
Configuring the Cisco Beeline TV remote control
Special attention should be paid to a simpler approach to setting up the Beeline TV remote control, in which the viewer does not have to look for a special password. When using it, you will need:
- turn on the set-top box and TV;
- press Set and hold it pressed for at least 3 seconds until the indicator lights up;
- press the "up" key and then sequentially switch to the right or left;
- do not stop the procedure until the equipment is turned off.
Self-disconnection of equipment (Cisco or another model) signals the successful completion of the procedure. The user will only have to check and start using the CP for its intended purpose.
Setting up the universal Beeline remote control
The easiest and most convenient way is to set up a universal PU on a TV. In this case, users will have to press STB, after which they will simultaneously hold down the Setup key and, depending on the brand of the prefix A (Tatung), B (Motorola), C (Cisco). Double blinking will signal the end of the procedure, but in order to make sure that the actions taken are correct, you should not neglect the check. The easiest way to do it is by pressing the sound switch button. If the volume changes, everything is correct.
