How to carefully stick a protective glass on an iPhone. How to glue the protective glass on the phone

Being constantly in operation, Cell phones subjected to various mechanical influences, which can sometimes disable the device. Sometimes one careless move can lead to the purchase of a new gadget. To prevent this from happening, you need to glue the protective glass on the phone. It will protect the screen from moisture, dust and minor impacts.

Necessary materials and tools

It is advisable to stick a protective glass on a smartphone or other mobile device immediately after the purchase, so as not to tempt fate once again. You need to understand that the screen is a rather sensitive part of the phone, and severe scratches can not only spoil the appearance, but also cause serious damage. And even ordinary keys can damage the display if they are in the same pocket with the device.

The procedure for replacing the protective glass is similar to installing a new one. To glue it, you will need the following materials and tools:

• dry rag;
• a napkin soaked in alcohol;
• liquid intended for cleaning computer screens, televisions or mobile devices;
• scotch;
• new safety glass.

Step-by-step instructions for gluing a protective glass on a smartphone

Before you understand how to stick a protective glass on your phone, you need to buy it. To do right choice, you should know certain nuances and follow a few recommendations:

• Glossy tempered glass is cheaper than frosted glass, but protects your phone's screen from bumps, moisture, and dirt.
• Matte protective glass, although more expensive, protects the phone screen not only from shock, moisture and dirt, but also from glare.
• Before purchasing a protective glass for the screen of a smartphone or other mobile device, it is necessary to test it for strength - it should not bend much.
• The high quality of the protective glass on the phone screen is evidenced by the oleophobic coating.
• It is recommended to give preference to protective glasses for the phone screen, which come with special wipes or spare films.
• A thicker screen protector will provide better protection for your phone's screen.

On a note! It is important to prepare in advance workplace. It is better to choose a room that contains a minimum of dust. For example, the ideal place to stick a protective glass on a smartphone screen is a bathroom or kitchen. There are enough textiles in the living room and bedroom that attract dust particles. As a result, troubles may arise that prevent you from gluing the protective glass to the phone screen. It is better to wipe the desktop with a napkin.

Step-by-step instructions for gluing a protective glass on a smartphone:

1. Before sticking a new protective glass or film, it is necessary to remove the old protection. To do this, slightly pull on its edge at an angle of about 60 degrees.

1. Before you start gluing a protective film or glass on the smartphone screen, you must thoroughly wash your hands with soap and water. In addition, the display surface of the phone must also be clean and smooth. Using an alcohol wipe, you need to get rid of dirt. You can also use a cloth soaked in cleaner to clean the phone screen. You can make your own stain remover by mixing water and alcohol in a ratio of 5:1, respectively, and adding a small amount of dishwashing gel. The work surface also needs to be cleaned.

1. The screen of the phone must be carefully wiped with a napkin to a shine. If there are dust particles left, you should walk with tape, as seen in the photo.

1. The protective glass must be removed from the package and the film removed from it. The protection is installed on the screen in such a way that there is a correspondence with the central button and the phone's speakers. To fix the protective glass on the surface of the smartphone display, you need to slide your finger in the center from top to bottom.

1. If air bubbles remain under the protective glass, you will have to get rid of them. For this, it is necessary to credit card or with a spatula that comes with the kit, from the center to the edges.

It is not necessary to exert strong pressure on the display, air bubbles will quickly be removed even with light pressure. If you get a smooth and even surface, the protective glass was glued correctly. Despite the small thickness, due to which many people equate this overlay with a film, it provides reliable protection for the display from external influences.

How to re-glue protective glass?

Many owners of smartphones and other mobile devices are wondering: is it possible to re-glue the protective glass on the display? Modern gadget surfaces are allowed to be reused. To stick the protection again, you will need to carefully remove the glass, and then wipe the adhesive side with alcohol and allow to dry. After that, you can glue the protection, not forgetting the coincidence with the button and the speakers. Then it remains only to expel the air bubbles.

Video: how to stick a protective glass on your phone yourself?

The videos below will help you properly stick the protective glass on the phone screen at home. As a result, the device will be provided with reliable protection against scratches, harmful effects of moisture and pollution, which will extend its service life.

phone is enough expensive thing that accompanies us every day. At the same time, I really want to preserve its original appearance as long as possible, protect it from various damages. The weakest point of a smartphone is the screen. Despite modern technology, the display continues to collect numerous scratches that negatively affect its appearance. The only reliable way to protect the display from scratches is to stick a protective glass. But it is not so easy to do so. In order for it to serve for a long time and reliably protect the screen, you need to clearly know how to stick it on the phone.

Of course, salon staff cellular communication kindly offer their services. But you'll have to pay for it a considerable amount. Therefore, it is better to stick the glass yourself. In addition to savings Money, you can get a good experience. In addition, you yourself will do it better, since store employees do not have enough time to follow the entire process technology.

Advantages of glass over film

The film is much cheaper, but it has several disadvantages. Firstly, it wears out faster and fades. Secondly, the film does not protect against chipping during impacts. These parameters are quite enough to purchase glass and reliably protect the device.

The actual advantages of glass include the following parameters:

• it is almost impossible to scratch;
• looks like new for a long time, does not fade, does not rub off;
• reliably protects not only from minor damage, but also from strong mechanical impact;
• securely attached to the display, thanks to the silicone base.

In addition to these advantages, there are some disadvantages:

• increases the thickness of the phone;
• has a high cost compared to alternative methods of protection.

Considering that the flaws are not critical, glass always remains the most aesthetic and practical way to protect the screen.

Protective glass characteristics

At first glance, such protection is a monolithic part, but this is an erroneous opinion. In fact, it consists of five layers. Moreover, its thickness does not exceed 0.3 mm.

The first layer is an oleophobic coating. Thanks to him, the finger glides across the screen with ease, and dirt is removed without much effort. The second layer is protective. It is he who represents a solid base that protects against mechanical damage. The third layer protects against glare. The fourth holds the fragments, preventing them from scattering in case of glass breakage. The last layer consists of silicone, thanks to which it is securely attached to the surface of the display.

Protective glass bonding technology

Before sticking the protective glass on the phone, you need to prepare all the necessary equipment. The minimum set of tools consists of an alcohol wipe and a clean, lint-free cloth. Also, do not forget to wash your hands and preferably wipe with alcohol. This is done in order not to leave stains on the screen and protective glass. Otherwise, you will have to spend a lot of time removing contaminants.

Glass bonding is carried out in several stages:

If everything is done correctly, the procedure can be considered complete and enjoy the result.

1. If the phone is completely new or recently purchased and at the same time the factory film is preserved on it, then it is unnecessary to degrease and wipe the display. Factory film reliably protects the screen from dust and grease. It is enough to remove it and immediately paste the glass.
2. If you didn't get it right the first time, you can try again. To do this, you must very carefully unfasten the edge of the glass and remove it from the screen. After that, repeat the procedure according to the instructions. The main thing to remember is that there are few attempts, since after each peeling off the silicone base is damaged.
3. If dust has got between the film and the screen, you need to carefully peel off the glass, remove the dirt, then repeat the gluing procedure.
4. If a previously damaged or completely broken protective glass is pasted on the phone, then you can remove it using any plastic card. This method is the most effective and safest.

At first glance, the process may seem complicated and time-consuming. In fact, the whole procedure will take no more than ten minutes. The main thing is not to be afraid. Using the tips from the article, you can reliably secure your smartphone and gain a good experience. The main thing is to believe in yourself and remember that not a single person who sticks protective glasses has graduated from a specialized institute in this area.

All photos are clickable

In the review of the glass screen protector, I promised to tell about the experience of operating this accessory in a couple of months. It is interesting primarily against the backdrop of problems with the previous generation -. Was the company able to overcome the problem with the edges peeling off over time? Not really. Read more about it below.

About good

Before I start "kicking glass with my feet", I would like to talk about the positive aspects of its use. In particular, in terms of ease of use, no plastic or polyurethane film is still able to compare with full-fledged glass. There is absolutely no effect on the image, plus the finger glides over the surface of the GLAS.tR just like it would on an iPhone screen.

The accessory “hung” on the phone for more than three months and, naturally, at that time I didn’t particularly worry about the safety of the display, I wiped it with anything, sometimes I put it with the glass down, in general, I didn’t strain. Anyway, the screen protector is glued, and it was necessary to test it thoroughly. I didn't scratch it, although I didn't try hard. Naturally, if you wish, you can ruin anything you want, but there is no doubt about the hardness of GLAS.tR - a complete analogue of the glass that stands on it.

In addition, while writing the review, I experimented with regluing glass, since the first time it lay crooked. As a result, a couple of small bubbles formed on the edge, in the lower right side. I was afraid that they would quickly grow to decent spots, but this did not happen, and the size of the bubbles remained the same for 3.5 months:

About Features

I personally did not feel a slightly increased weight of the gadget, but every active iPhone 5 user who took my phone in hand noted that it was heavier than usual. It's worth considering. Although the weight gain there is scanty - up to 10 grams.

More important is the fact that this glass is far from compatible with all cases, since it increases the thickness of the phone by 0.5 mm. For example, although it is placed in a punch machine with a glass screen protector, it enters and is removed with a certain effort. Flip cases such as Spigen SGP Argos do not close very tightly, yet the extra 0.5 mm makes itself felt.

In addition, the effect almost disappears when the picture seems to float above the screen. This is a trifle, yes, but when I peeled off the glass, I felt with particular force all the buzz from the display, made using full lamination technology. That is, without an air gap between the layers, plus the touch panel is built right into the protective glass.

Bubble again

Actually, it was the most burning moment of the experiment. Will the glass begin to peel off at the edges, as happened with the first generation on a personal iPad and on a friend's Galaxy Note? I will not pull the cat for a causal place and I will answer right away - yes, a juicy bubble appeared in the corner:

And he got out abruptly and literally in a week grew twice. Thus, the glass lasted a little more than three months, but it is worth considering two points. The first- the manufacturer on the packaging of the screen protector warns that it is advisable to use it simultaneously with a bumper-type cover or with an analogue that covers the edges of the glass. I didn’t bother with this and the iPhone 5 for the most part was naked as a falcon.

second moment- on duty, you have to constantly dress your smartphone in various kinds of accessories, while there are times when the gadget is decently squeezed, twisted, etc. This also gives its negative effect on a glass screen protector.

For clarity, I recorded a video and in it, in addition to demonstrating the flaws of GLAS.tR, according to tradition, the process of brutal peeling off an accessory was demonstrated:

In the dry matter

What can I say? The screen protector is expensive, it is desirable to use it in conjunction with the bumper, plus the weight and thickness of the iPhone 5 slightly increase. On the other hand, a full-fledged alternative to this kind of glass has not yet been invented, and in terms of tactile sensations, it remains the standard for me.

It is also worth noting that Spigen SGP is currently working on the third generation of such accessories, the main difference of which is in the thickness reduced by half. Theoretically, this will solve both the problem of compatibility with covers and the gradual peeling off of the screen protector. As soon as the new GLAS.tR falls into my hands, I will definitely write about it.

Wow, new Apple: