How to paint walls with a roller with your own hands. Which roller is better to paint the ceiling and walls with water-based paint?

If you need to paint a large area, it is better to use a roller. About how to paint with a roller correctly, and we'll talk in this article. Working with this tool is both easier and faster than with a regular brush. In addition, the quality of the painted surface is much higher. The range of rollers is very large; they are available in different widths (from 10 to 30 cm) and with different handle lengths. If you need to paint the walls, it is better to choose a roller with a long handle. The same tool can be used to paint the floor in hard-to-reach places. The size of the roller directly depends on the type of surface to be painted.

Roller selection

The roller is a cylindrical roller rotating around an axis, which is fixed to the handle. A special material is wound onto the cylinder, which is removable. Rollers of different sizes and sizes can be attached to one handle-holder. different materials– woolen fabric, polymer material, artificial or natural fur.

The following types of rollers are distinguished:

• With short artificial pile;
• With fur covering;
• Universal fur rollers;
• Foam-coated;
• With relief patterns and designs.

Any type of roller must be of high quality, since it has a direct impact on the surfaces being painted. If there is a need to increase the working area, you can additionally purchase a rod with a screw handle and a high-quality replacement nozzle. A well-chosen nozzle allows you to reduce paint consumption. If you plan to paint smooth surfaces, then use a half-inch long nap roller, and for rougher surfaces (for example, putty walls, paintable wallpaper, textured plaster, textured ceilings, etc.) use a ?? inches. For semi-gloss paints, rollers with any pile can be used.

As for the paint container, it is recommended to use not a paint tray, but a large bucket with a hanging grid to drain excess paint. This container is more convenient because it is more stable and can hold more paint. Small paint trays can come in handy if you need to do some minor painting, such as contouring.

In addition to the roller itself, you will also need to stock up on brushes, since a roller is not very convenient for painting the joints of walls with the ceiling and floor, as well as corners and places near radiators. Brushes should be of different sizes and good quality, otherwise their lint will fall out and remain on the paint.

Painting with a roller

To get a beautiful and unique apartment design, the walls are painted. This work is not difficult, and even very pleasant to perform. To achieve a high-quality result, you need to know how to properly paint walls with a roller.

A roller applies paint to the wall more evenly than a brush.

Technology of painting walls with a roller

Required:

• roller;
• bath;
• brush;
• dye.

Before you start work, you need to prepare all the necessary tools. Depending on the achievement of the painting effect, you choose which roller to paint the walls with. To apply an even base layer, a roller made of high-quality fur is used, and to obtain marble marks, a roller made of fabric is used. The work will also require a special tray, one of the sides of which has a ribbed surface to remove excess paint. If there is no such device, then you can make squeezing nets, for example, from a piece of plywood, on which holes (12-15 mm) are drilled in a checkerboard pattern in increments of 20 mm.

How to paint walls correctly to get an evenly painted surface? First, using a brush, carefully paint the areas that are inaccessible to the roller, i.e. corners of walls, near baseboards, etc. Then the roller is dipped into the paint and rolled for spinning. You should start painting the walls from the side on which the window or door openings are located. The work must be done sequentially step by step, starting from the edges. Apply paint to the wall with a roller, rolling it along its entire height from top to bottom, back and slightly diagonally. In this case, the next strip must overlap the edge of the previous strip by 4-5 cm. In order for the painted surface to be uniform, the paint must be well shaded, cleaning the joints between the strips. If necessary, you can apply it in two layers. On walls with a small area, you can first apply the paint with a brush, shading it well, and then roll it with a roller.

In order for the roller to last a long time, it must be looked after. After each use, carefully remove any remaining primer or oil paint. Having finished painting, the roller should first be washed in a solvent, and then in water with added soap. After using the primer, you can simply wash it in soapy water.

Return to contents

Decorative painting of walls with a roller

Required:

• fabric roller;
• primer;
• dye;
• acrylic emulsion.

How to paint walls to get a marble effect? To do this, use a roller made of folded fabric. Thanks to them, unpainted areas remain, and a mottled surface is obtained. In this case, paint of two shades is used: the first to obtain the main background, and the second for the marble effect. Walls painted in light colors, on which brighter paint is structurally applied, look very nice.

Before painting work, the surface is prepared, from which the dust is first cleared, and then a primer is applied.

After this, you need to paint the walls with the main background. When the first layer has dried, you can apply another one if necessary. To apply the structural layer, use a fabric roller to mix: matte water-based paint and acrylic pearlescent emulsion in a 1:1 ratio. The prepared composition is applied to the walls, starting from the top. In this case, you need to move the roller in different directions. When painting the surface, special attention is paid to the corners and places above the baseboards. To paint them, you need to soak a lint-free cloth in the paint and use it to apply strokes to the unpainted areas, simulating the resulting stains.

When doing this with a fabric roller, you need to know that when applying one layer, the main color will be clearly visible through it. And if you often run the tool over the surface, the result will be a more saturated and dense structure. To achieve the desired effect, work is carried out in small areas. Like any other tool, a fabric roller should be looked after. After each painting, it is thoroughly washed. Dirt and cobwebs stuck to it are removed using the sticky side of the masking tape.

Carrying out repair work yourself is not as difficult a process as it seems at first. But there are some nuances, as with any other issue. Particular attention should be paid to painting the walls. The roller is used precisely at this stage. The tool is indispensable when doing all the work yourself. Let's try to figure out how to properly paint walls with a roller, and what kind of tool should be used.

Types of rollers

It is necessary to study the characteristics of the tools in advance, and then there will be fewer problems with the choice, because these products cannot be called universal. They come in the following types:

• With foam rubber. An excellent option if varnishes and adhesives are applied. The only drawback is the ability to wear out quickly. It is better to use the tool when processing canvases.

• Fur. They have good absorbency. Almost all the paint remains on the treated surface. As a result, we get a uniform layer, devoid of smudges and unpleasant changes. Can be combined with any colors. Flint from such rollers may remain on the base.

• Velor. Also compatible with any type of paint. They contribute to the formation of smooth and beautiful layers that have no roughness. But this variety is capable of absorbing a large amount of material. Therefore, it is not always suitable for those who are interested in how to paint with a roller.

• Thread or polyamide. Such rollers are made from fabrics stitched with special threads. An ideal option for covering walls with any variety of materials. These tools are convenient and easy to work with and will allow you to achieve the desired result. The main thing is to be careful to avoid splashing. Then it will be easy to figure out how to paint walls with a roller.

When choosing a tool, you must conduct a careful visual inspection. The presence of fibers and protruding threads on the surface is unacceptable. If you choose fur products, then the longer the pile, the better. The perfect solution with wallpaper with deep patterns, or walls with unevenness. A short pile is acceptable if you have to process walls where everything is smooth.

But it is not only the type of material that needs to be taken into account. An equally important factor is the width of the roller. 30 centimeters is the optimal parameter for use in city apartments. If the roller has an increased width, then difficulties arise during further work. It will require taking diluted paint in large quantities, and the process itself will become more complicated.

It is recommended to purchase not only the roller, but also additional components for it. For example, the process is made easier thanks to the extension handle. Or a special grater - it helps to get rid of residual material.

The use of paint rollers provides the following advantages:

1. Process large areas in a short time. The quality of the finished surface pleases customers for many years.
2. Compared to a brush, a roller is a more convenient and pleasant tool for constant use.
3. Long handle connection. This will allow you to stay on the floor while you work.

But the device also has some minor drawbacks. Those who are concerned about how to paint with a roller should also remember them.

1. Inconvenient processing of joints and corners. Then the brushes do a better job.
2. Some varieties absorb too much paint. In this case, a special spinning device will help.

Preparing the surface for painting

You need to purchase the following equipment before starting repairs:

• Paint tray.

• Paper masking tape. It is needed to provide additional protection.

• Emery block. It is used in the case of manual sanding of coatings.

• The rollers themselves, with different sizes and reliefs.

After purchasing everything you need, follow these steps:

1. We take down the curtains.
2. We move the furniture to the middle of the room and cover it with polyethylene film.
3. Special covers also help with such work.
4. Skirting boards and other similar interior elements are also protected from paint. That's what masking tape was needed for. The material is cheap, but can bring a lot of benefits. Painting walls with a roller will be effective.

We cover floors, doors and windows with plastic film. Additionally, the film itself is fixed with masking tape.

1. Turn off the electrical power.
2. We remove covers on switches and sockets, protecting the surfaces of electrical appliances from paints.
3. We cover the surface of electrical appliances with masking tape.
4. Temporarily remove the heating radiators.

The valves in the system must be completely closed. In the place where the pipes are supplied, a tray must be placed to protect against water getting on the floor. The cap hooks connecting the radiator to the pipes are completely unscrewed, and the water is drained. The radiator must be removed from the brackets responsible for holding it. All that remains is to pour out the rest of the liquid. Roller painting of the wall is complete.

The old top layer must be removed from the wall, which can be done with a regular spatula. The surface will become smooth if you clean it with sandpaper. This part is not performed if walls on which wallpaper is applied are processed. In this case, preliminary priming of the surface is sufficient.

In addition, a set of actions will be required to level the walls, as well as eliminate various defects:

1. We fill potholes with cracks with plaster or putty. Take a small flat spatula.
2. Sandpaper up to 120 grit helps smooth the surface as the materials dry.
3. A sponge or a thin cloth is used when it is necessary to remove dust and dirt from the surface.
4. All that remains is to vacuum the floor. We figured out how to paint the walls.

It is necessary to bring not only the walls themselves into proper condition, but also the roller with which they are processed.

If you choose a fur roller, then several steps will be required when painting the walls:

1. Soak the instrument in soapy water for three hours.
2. We use running water for thorough rinsing.
3. Dry the device.

With this preparation, you don’t have to worry about the appearance of lint on the surface. They simply will not fall out of the tool. It is easy to apply the material with a roller without streaks.

In the video: painting walls in two rollers.

About roller painting technology

1. Pour a small amount of paint into a special tray.
2. The roller itself is dipped into this bath.
3. The roller rolls out along the mesh or along the corrugations that the bath is equipped with. Then the paint will be evenly distributed throughout the instrument. The action is performed several times.
4. It is necessary to determine where to start processing and in which direction to move.
5. The best option to start work is a corner of the room located near the window.
6. Movement is carried out on any of the acting sides.

The main thing is not to put too much pressure on the instrument. The entire surface must be painted evenly so that empty gaps do not appear. The movements are performed smoothly, only in this case the declared result is achieved. First, the roller is moved from top to bottom, and then - in reverse order. The paint is applied in several layers if you want to get rich colors. In this case, subsequent layers are applied only after the previous ones have dried. Then the painted object looks beautiful.

The corners must be painted with a brush; it is never possible to completely cover them with the material using a roller.

Basics of painting walls with a roller (21 photos)

Apartment renovation

Extended, even structures, which include walls or ceilings, are best painted on your own using a standard roller. Our industry produces rollers of various sizes and structures. There are rollers on sale with a working surface width from five to thirty centimeters. They also differ in the size of the handle. You need to choose the right size taking into account the problem being solved. So, for example, to paint walls, they often buy a roller with more elongated handles. However, it is more important to make a successful selection of the “coat” for the roller.

Which roller to paint the ceiling with

Roller for ceilings must be selected based on several parameters. Most often, a roller for the ceiling has a relatively small or medium handle, compared to a roller for painting walls. The conditions required for the quality of painting the ceiling surface are often increased, as a result of which the roller must be selected scrupulously. More often, for painting ceilings, a tool with a slightly elongated, non-hard pile is used. Preference should be given to natural pile, for example, from real wool. A very short pile will absorb a small amount of paint. You can use a foam roller for the ceiling, but this is not an ideal option: it can create “bubbles”.

Which roller to paint the ceiling withand walls

There is no need to roll out the paint mixture absorbed into the roller immediately on the ceiling surface, as this can lead to uneven distribution of the layer. First, you need to roll it out on a pre-prepared piece or other similar base. A painter's tray can be used as a tool if the dimensions of the tool are not very large.

Which roller to paint walls with?

Before you start selecting a roller for painting walls, you need to choose the type of paint coating. From given choice The type of tool itself will depend. For example, water-based paints are easy to work with foam roller. It can also be used to work with various water-based adhesive solutions (,). However, it is not recommended to use such a roller with emulsion compositions. Foam rollers are one of the cheapest options. Their main disadvantage is their short service life. In addition, they splash a lot during intensive work.

Which roller is better?

Rollers with thread, velor and fur surfaces are perfect for applying different types of paints, even those with an organic base. These fabrics pick up a fairly small volume of paint and distribute it evenly over work area, do not form splashes or streaks.

During painting work, the main thing is that the paint layer on the wall is of the same thickness. They do a great job with something like this. In addition, they are good at applying paint to various imperfections in walls (small roughness, cracks, potholes, crevices). The disadvantages of fur rollers include their ability to “shed”, leaving behind “lint” on the painted area. This is usually the problem with inexpensive instruments.

They have properties identical to fur. However, they are able to form an even more even coating. After using them, the paint layer looks perfect. This type of roller is used in critical areas when painting wall structures. There is an opinion that this is a tool for professional craftsmen. If a beginner paints with a velor roller, all the imperfections are visible on the surface. In addition, this roller is good for applying varnishes.

Good when the priority is speed rather than quality of painting (for example, if the work area has a very wide perimeter). When using it, you must not forget that very intense rotation of the drum can cause splashes. As a result, it is better not to rush. The thread roller creates an interesting texture on the painted surface.

Selecting a roller for painting walls: pile size

There is a principle: The worse the quality of the wall surface, the longer the roller pile is chosen. There must be a tool with a large pile that is used to paint a textured wall (for example, or wallpaper with a texture). A long pile can perfectly paint various potholes, depressions, and cracks. For smooth walls, you need a roller with a small pile! Remember: if you use a roller with long pile on a flat wall, smudges will form.

Water-based paint is widely used for indoor work - to cover walls, floors, and ceilings. It belongs to the family of water-dispersion paints and has many advantages: it does not have a strong odor, is non-toxic, durable, retains color for a long time, and dries quickly. Contains water, polymers and color pigments. You can add pigments of any shades to the solution, mix them in different proportions and get a unique original color. Since the most convenient tool for applying paint to flat surfaces is a roller, builders are interested in which roller to paint the ceiling with. water-based paint, as well as walls and floors. The quality of the final result may depend on the choice of roller, so you need to have a good understanding of which roller is needed for water-based paint in each specific case.

Types of water emulsion

The type of coating you prefer will also determine which roller you use to paint the walls with water-based paint. There are several types of paint: acrylic, silicone, silicate and mineral.

The first variety is the most popular. It contains acrylic resins, sometimes latex is added. The surface painted with acrylic coating is not afraid of moisture, it can be washed without worrying that the paint will soon be erased.

Silicone paints are produced on the basis of silicone resins. They successfully cope with sealing cracks up to 2 mm. They are also used for surfaces that are frequently exposed to moisture. If you carefully apply a paint roller coat of water-based paint to a damp wall, it will help fight off mildew and mildew. The cost of such paint is above average.

The distinctive component of silicate water emulsion is colored glass. This variety is widely used for outdoor work. The paint adheres well to brick, concrete, cement, plaster and protects walls from adverse external influences.

Water-dispersion mineral paints contain either cement or calcium hydroxide. It is great for painting ceilings and walls, but its service life is limited compared to other types.

What types of rollers are there?

Once you have decided on the water-based paint, it’s time to choose which roller to paint the walls with water-based paint. Why a roller? Of course, you can use an alternative - a brush or spray. But applying the tools first will take much longer, and will look less aesthetically pleasing - even on a perfectly smooth surface it is difficult to apply the coating with a brush without obvious strokes and smudges. The second option is certainly practical and convenient, but it is not always possible to spend money on such an expensive device.

On the shelves of construction stores there are paint rollers for water-based paint made from the following materials: foam rubber, pile, velor, polyamide. Their prices do not differ that much. Therefore, you might think that they are no different. But each type has its own characteristics during operation. Before deciding which roller is best for water-based paint, it’s worth understanding the properties of each.

Foam rubber or pile

Foam tools are well suited for applying varnish and adhesives. However, when deciding which roller to choose for water-based paint, it is better not to buy a foam one. It quickly absorbs paint, moreover, it flows and drips abundantly from the instrument. A foam roller is short-lived and will quickly lose its initial properties.

A lint tool can be used to paint any type of coating. There are rollers with short, medium and long pile. A device with medium-length bristles will cope best with applying water-based emulsion. Short ones absorb an insufficient amount of paint, and long ones, respectively, a lot. You need to be especially careful when choosing which roller is best to paint the ceiling with water-based paint. If you take a wide tool with long hair, it will become saturated with the mixture and become heavy. When painting the ceiling, you need to raise your arms all the time, and holding such a load, they will get tired several times faster. Thus, when thinking about which roller is best for water-based paint, buy a device with medium-length bristles. But be careful: during the painting process, lint may remain on the surface. Carefully remove them immediately, otherwise they will dry out.

Velor and polyamide instruments

Velor perfectly resists the effects of particularly aggressive components of paints, varnishes and solvents. It is equally good to use with different types coatings, so when deciding which roller to paint the ceiling with water-based paint, you can safely take such a tool. The roller has no significant disadvantages, but there are characteristic feature– they will have to be often dipped into a container with water emulsion, because they quickly absorb the mixture.

Polyamide rollers are made from textiles, stitching the pad with threads. Professional painters love them very much, because polyamide rollers are durable and can be used for applying any paints, varnishes, and enamels. You can safely buy such a tool as a roller for water-based paint for walls. Please note that you should paint with such a device very carefully and carefully, otherwise the paint will scatter in different directions.

Let's summarize which roller is best for painting walls with water-based paint: you can take a fluffy one with medium bristles, polyamide or velor. When deciding which roller to paint the ceiling with water-based paint, give preference to the same types. But keep in mind that velor quickly absorbs paint, and lowering your hands to the container and lifting them many times, you will agree, is very tiring.

General rules for choosing a roller

Regardless of which roller you choose for painting the ceiling with water-based paint, you need to thoroughly check it in the store, because no one is immune from poor-quality purchases. So, first of all, inspect the tool. The pad should be uniform, fibers and threads should not stick out in different directions, and there should be no cracks on the handle. Seams on the pad good roller will be almost invisible, not too prominent. Squeeze the pad tightly with your hand - after you release it, it should return to its original shape. Following these simple rules, you can choose a high-quality water-based paint roller for ceilings and walls.