DEGREES OF COMPARISON OF ADJECTIVES In English, as in Russian, ...
Beeline television- this is the ability to watch television channels transmitted via network cable. To implement it, you need access to the Internet through a home network router and the installation of a special set-top box - a device for decoding a digital signal and controlling Beeline television channels.
The list of TV channels transmitted to subscribers consists of a package of paid and free programs. The set of paid software package depends on the selected tariff plan. The list of free Beeline television channels, that is, programs available for viewing even with financial blocking, consists of the first federal multiplex and two TV shopping channels.
To receive digital television, you need TV set-top box Beeline. All Beeline TV set-top boxes are programmed for this provider and work only in its network. Set-top box models are distinguished by the presence of various audio and video outputs: RCA, Component, Compossite, S-video, SCART, Optical, HDMI.
The Pace 8005 TV box has the ability to connect to a TV using a high-frequency antenna input. Pace 8005, unlike other set-top boxes connected to a computer network via an Ethernet connector, also has the ability to connect via a Coaxial cable.
In a number of models of Beeline set-top boxes, a hard drive is installed, with a capacity of 120 to 500 GB, which allows you to record and then play back a television program from the air.
The set-top boxes offered by the campaign for watching Beeline television, their characteristics and differences, are summarized in the table.
| Recording | HDD | HDTV | 3D | Video outputs | |
|---|---|---|---|---|---|
| Cisco 430 | Yes | 320 GB | Yes | Not | |
| Cisco 2001 | Not | - | Yes | Not | HDMI,SCART,RCA (tulips),Optical |
| Cisco 2200 | Not | - | Yes | Not | HDMI,SCART,RCA (tulips),Optical |
| Cisco 2230 | Yes | 350 GB | Yes | Not | |
| Cisco 7031 | Yes | 160 GB | Yes | HDMI, S-Video, Component, Composite Optical | |
| Motorola 1002e | Not | - | Yes | Not | HDMI,SCART,S-Video,RCA (tulips),Optical |
| Motorola 1200 | Not | - | Yes | HDMI, SCART (TV), SCART (VCR), S-Video, RCA (tulips), Optical | |
| Motorola 1216 | Yes | 120 GB | Yes | Yes | HDMI,SCART (TV),SCART (VCR,S-Video,RCA (tulips),Optical |
| Pace 8005 | Yes | 500 GB | Yes | Not | HDMI, Rf out, Coaxial in Component, Composite Optical |
First of all, you need to connect the Beeline prefix to a 220V outlet using the included adapter.
Using the patch cord included in the kit, connect one of the outputs of the Beeline home network router to the input of the TV set-top box.
When the set-top box is connected correctly, the green indicator on its front panel will light up.
Connect TV box to TV. It is best to use an HDMI cable, which transmits the image and sound in the best quality.
It is necessary to set up the Beeline TV set-top box to play a high-quality image: press the Menu button on the remote control, then select the Settings, Format options and set the value to at least HDTV 720p.
Beeline television remote control
Legend and location on the Beeline TV remote control buttons.
- 1 - Beeline remote control programming
- 2 - Selecting a controlled device
- 3 - Fast rewind
- 4 - Recording
- 5 - Stop
- 6 - Fragment repeat (7sec)
- 7 - Quick jump to video directory
- 8 - Display TV Menu
- 9 - Move to the previous menu item
- 10 - Exit TV Menu
- 11 - Displaying a TV program on the screen
- 12 - Volume
- 13 - Mute
- 14 - Scale the image to fit the TV screen
- 15 - Fast switching between current and previous channels
- 16 - Switch channels or pages Menu
- 17 - Go to information pages
- 18 - Navigation in the Menu, calling the Picture in Picture function
- 19 - Enter the selected menu item
- 20 - Quick transition to the Recording section
- 21 - Skip fragment (30 sec)
- 22 - Pause
- 23 - Start browsing records
- 24 - Fast Forward
- 25 - On/Off
Digital TV Beeline
To plug digital television Beeline in an apartment using provider networks, this means connecting IPTV television (Internet protocol television). To do this, you need a digital receiver - a beeline TV set-top box, which will connect directly to the global network. This means that for beeline digital television it is necessary to have Internet access in the apartment.
When connecting Beeline digital television, subscribers are provided with a set-top box for rent. A nice bonus for owners of game consoles will be the opportunity to watch Beeline digital TV on the game console. xbox 360.
Home TV Beeline
Home made using IP-television technology, thanks to which it becomes possible to transmit a television image over a computer network. For Beeline television to work, it is necessary that a Beeline computer network be installed at your entrance. If you are already using the Home Internet service, you can additionally connect Beeline digital television. To connect home television to Beeline TV and a computer, you must:
Turn on the switch and the beeline TV set-top box in the power grid.
Insert the cable connector of the provider brought into the apartment into the Line port of the switch.
Connect the patch cords included in the installation kit to the free connectors of the switch. After completing these steps, the indicators of the connected ports should light up on the front panel of the Beeline TV set-top box.
Connect one cable to the computer, and the second to the TV set-top box.
Turn on the TV, when connected correctly, a green light will light up in the button on the front panel.
Beeline TV
Digital TV Beeline- is television high definition(HDTV) and quality. A large number of additional useful functions such as: pause, rewind TV, program for 2 weeks ahead, record 4 channels simultaneously. And also known to everyone and ranked first in Russia (in terms of quality and number of connected subscribers) cellular Beeline.Beeline Moscow rates
And just recently, Beeline introduced new packages: Family, Family +, Super Family, Super Family +. Connections to all "All in One" services at once (Beeline mobile connection for your whole family, Beeline home Internet and Beeline home television). In this "All in one" package, home Internet and Beeline TV are available for free!And most importantly - this is not a promotion! These are constant tariffs from the leading provider Beeline!
Important, connection home internet and TV provider Beeline Moscow free of charge and in a short time. You can find out all the details from the official Beeline representative in Moscow, on our website or by phone.
(Click on image to enlarge)
1. Beeline TV set-top box remote control with key decoding. Useful for subscribers who are looking for information and want to set up Beeline TV. I’ll make a reservation right away, this manual (manual) is written for those who first picked up the remote control from the Motorola set-top box
2.
To see which package is currently connected, change the Beeline channel package or connect additional channel packages, click the button Menu, then with the key right Way down scroll to Channel packages and press the button OK. 
You can see the available channel packages on the screen by using the buttons Up down menu, select the channel package you are interested in and press the button OK. Now you can view information about the package or connect the desired channel package by selecting it and pressing the key OK.
3. View account status Beeline TV. In order to see the status of your personal account, you need to click the button Menu, then with the key right follow to the position " ", then with the key Way down scroll down to "Account Status"
Next, use the keys Up down"Account Status" and click OK button. If you are connected + to , then the account status will be displayed as a single balance, for example, like mine. Here you can pay with a VISA card directly through the set-top box or look at your personal account number and pay in any convenient way.
4. Beeline TV interactive services. It's not just cable TV, it's interactive digital TV. It has Yandex weather, exchange rates, exact date and time; watching videos from Rutube; social networks Facebook, Twitter, Vkontakte, Odnoklassniki; sea battle game; sports news from Rambler.
All this can be used with the remote control directly on your TV screen. Click Menu and key right to the "Interactive" position. Select the service you need with the keys Up down and press OK.
5. Recording TV shows. There are several ways to record broadcasts. For example, by simply pressing the button Recording on the remote control during a broadcast. In this case, the program will be recorded from the very beginning, provided that you watch it from the beginning and did not change the channel while watching, otherwise from the moment you pressed the key Recording. This was the first way.
You can also schedule a TV show to be recorded tomorrow or next week (up to two weeks in advance). You can also schedule a cycle of TV shows, suppose recording a series, each episode of which will be recorded automatically. For example, “Housing issue” on NTV will be recorded on the hard disk of the Beeline set-top box every Sunday at 12 noon, regardless of whether you are watching another channel or your TV was turned off.
6. Schedule recording. To schedule a recording, you need to enter the menu by pressing the button Menu, scroll with the key right to point Recording and scroll with the key Way down to "Set up Recording". Click OK and start planning the recording of the program you need using the navigation buttons (Up, Down, Right, Left) 
choose navigation buttons desired menu item and press OK 
By the same principle, select the desired gear and program the entry with the key OK. If you did everything correctly, the message “Recording is scheduled” will appear. 
7. Change recording options. To cancel the recording or edit the recording parameters, enter the "Scheduled" menu 
Find a scheduled entry.
the entry you wish to delete or edit with N navigation buttons and select it with the button OK 
Now you can delete the scheduled recording, configure recording settings, record everything (meaning all programs with this name that will be broadcast in the future, for example, either record one episode of the series or record all episodes)
8. Watch recorded TV shows. Go to the menu, use the navigation keys to select the item "View records" 
Select the desired entry and click OK
9. Channel settings. With Beeline TV, you can set up the channels you need in the desired sequence. Go to the menu and select "Settings" 
Set up channels Mark the desired channels with Navigation keys and 
click OK on the "Save" item, now you can make it so that when scrolling through the channels are displayed in the order you need, to do this, select the "Arrange" item 
Use the navigation keys to move through the channel list and
press OK on the arrow indicating the direction you want to move this channel.
10. TV program is right in the menu of your TV, you don't need to buy it in a kiosk, you don't have to look on the Internet. Go to the set-top box menu and select "TV program" 
Directly from the TV program, you can see the description of the program.
(movie), set up the recording. To do this, navigate through the menu navigation keys, select the desired gear with the key OK 
Here you can see
actors information, description, set up recording.
11. Set-top box settings. The settings menu allows you to adjust the aspect ratio for your TV, adjust the sound for menu navigation, set the audio format, select the style of the TV program, and much more. Whoever has reached this point of the article will deal with the settings for two times.
12. Parental lock. You can prevent children from viewing channels that you think are not desirable by setting a password for the channel. How to do this is described in a separate article.
That's actually all, I tried to briefly and meaningfully talk about the main opportunities in Saratov. There is a setup video here. Leave questions and comments in the comments. Connect friends and acquaintances at a discount and with your benefit.
Lesson 1.
Lesson 2
That's all for today guys))
Using Beeline remotes can be extremely convenient, but even the most reliable devices can sometimes fail. Therefore, in order not to lose the opportunity to enjoy your favorite TV shows and watch interesting TV shows and programs, viewers should know how the Beeline remote control is set up correctly.
To understand the mentioned procedure, it is enough to look closely at the type of equipment purchased and the model of the launcher, understand the features of the operation and settings of the equipment, and make several trial attempts to set up the set-top box. As a result, even if the first approaches are unsuccessful, the user will be able to achieve a positive outcome and regain control of the TV. And in the event of the next malfunction of the equipment, if it happens unexpectedly, it will be much easier to cope with difficulties.
When setting up the PU, you should pay close attention to several features:
- remote control model and the possibility of its interaction with various set-top boxes, for example, Motorola;
- set-top box model (for similar reasons);
- code, if required (located in the instructions on about page 20);
- the ability to automatically search for the correct code.
Additionally, you will need to decide whether to reset the equipment parameters to the factory level. Such actions may be necessary when problems arise and serious errors are made. But it is much more reliable to immediately show vigilance and discretion, not allowing yourself inaccurate movements and thoughtless button presses.
How to reset the Beeline remote control?
The first step is to find out how the Beeline remote control settings are reset to the factory level. This process contains the following steps:
- first of all, you need to press the STB key;
- then you have to press the Setup button and wait for the indicator to blink twice;
- alternately press the numbers 9, 7 and 7;
- wait for the STB button to blink four times.
The last signal means reaching the desired goal and resetting the parameters to the factory settings. In the absence of the specified reaction of the equipment, you should repeat the described procedure or contact the consultants of the cellular company by calling the contact service phone.
Setting up the Beeline TV Motorola remote control
To manually configure the remote to the TV, you need to specify in advance the code that is used for the existing model and type of equipment. The instruction in Russian, attached to each set of equipment, will allow you to choose the right option or prompt the viewer to choose one of several options suitable for the purchased set-top box. Knowing the code, it remains:
- turn on all appliances;
- press the Set and Aux or Set and TV buttons until the corresponding indicator lights up;
- enter the selected digital code;
- press the active, highlighted button.
After the process is completed, it is worth checking, making sure that the PU and the TV interact correctly. If there are problems, you will have to repeat all of the above steps using a different combination.
Setting up the Cisco Beeline TV remote control
A simpler approach to setting up the Beeline TV remote deserves special attention, in which the viewer does not have to look for a special password. When using it you will need:
- turn on the set-top box and TV;
- press Set and keep it pressed for at least 3 seconds until the indicator lights up;
- press the "up" key and then sequentially switch to the right or left;
- do not stop the procedure until the equipment is turned off.
Self-shutdown of equipment (Cisco or other model) signals the successful completion of the procedure. The user will only have to check and start using the PU for its intended purpose.
Setting up the Beeline universal remote control
The easiest and most convenient way is to set up a universal remote control on a TV. AT this case users will have to press STB, after which they will have to simultaneously hold down the Setup key and, depending on the brand of set-top box, A (Tatung), B (Motorola), C (Cisco). Double blinking will signal the completion of the procedure, but in order to make sure that the actions taken are correct, you should not neglect the check. The easiest way to do it is by pressing the sound switch button. If the volume changes, everything is done correctly.
