We make a pencil case for school with our own hands. Master class on making pencil cases for handouts Sew a pencil case with two compartments with your own hands

Tatiana Morozova

Universal pencil cases for handout material.

These pencil cases we use it very often both when organizing educational activities and during individual work and in didactic games. Filling pencil cases can be varied, in our case these are geometric shapes.

For making pencil cases you will need(per child):

5 empty match boxes;

Glue stick;

Colored self-adhesive film;

Scissors, colored cardboard (for geometric shapes);

Ruler.

1. Prepare empty matchboxes.

2. Using a glue stick, glue them together on the sides.

3. Measure out the required amount of color film and cover the boxes with it.

4. On top of each part, stick an icon indicating the item that will be located in that particular part. "box"- in our case, a geometric figure (circle, square, triangle, rectangle, oval).

5. Fill each cell with geometric shapes according to the designation above (For example: 10 figures each). The figures must be made in different colors on each side. Universal pencil case is ready.

Usage pencil case.

Didactic games to develop children's ability to navigate on a plane (“Decorate the Carpet”, “Treasure Hunters”, etc.)

Practice counting, the composition of numbers from units, from two smaller numbers; in comparison of sets.

Today, in fact, as it was before, it was not at all difficult to make a pencil case pattern with your own hands. Moreover, by spending literally a few minutes of your time, you can make a pencil case for a girl that resembles the shape of a bow. In this case, you will not need to sew anything at all.

First you need to prepare a rectangular fabric and fold it in half. The side edges must be trimmed evenly. The top should be cut off. At the same time, you need to try, because this particular side must be very neat.

Next, you need not to sew the pencil case with your own hands, but to assemble it, so to speak would be more correct. The side parts need to be glued together using hot or superglue. The first option would be the most appropriate here.

The fabric strip should be placed directly in the center of your pencil case. At the same time, leave enough fabric margin on all sides so that you can tie a bow as a result.

The strip should be glued to the bottom of the product. After that, put pens, rulers, pencils, etc. inside the pencil case. Next, you should turn the pencil case over and tie a knot. After this, tie a bow. It may be large, or it may not be very large. Do it to your taste. That's all, now you know how to make a pencil case out of fabric with your own hands.

How to make a pencil case with your own hands using a plastic bottle

We also suggest considering the option of a pencil case for a school-age child, using the most ordinary plastic bottle.

Of course, the option of a fabric pencil case is very interesting. But, by and large, it is suitable exclusively for girls. But you can also make such items, with your own hands, for boys, or universal options!

Oh, what beautiful ways you can come up with! In this matter, no one tells anyone, there are only recommendations, and if it comes to your mind to supplement the product with something else, you can experiment. Surely, you can make a very original version of a pencil case, and many children will envy your student! After all, you can’t buy such products anywhere!

To make a pencil case you need to prepare:

• Plastic bottles, two pieces. They should not be thin; it is best that the plastic is dense.
• Take one, beautifully colored wide zipper. It can be made of plastic or metal, whichever you like best.
• Superglue, but the best option is hot glue.
• Scissors.

To make a pencil case from a plastic bottle with your own hands, you will need its lower part, from both bottles. The principle is this: both parts should be connected to each other using one zipper.

On each bottle, to begin with, you should cut off the top. First, decide how long your pencil case will be. This will affect how long you will need to cut the pieces.

For example, to store pens, felt-tip pens, pencils, you will need to make one long part and one short one. The first one will serve to insert the accessory into it. The second one is used as a cover.

Then take the zipper. You should check that the correct length of the zipper is selected. This is easy to do by simply wrapping your bottle in bulk with a zipper. If the prepared zipper is too long, it needs to be shortened by cutting it on the opposite side of the one in which it ends.

Approximately, the total length of the zipper should be one and a half centimeters larger than the circumference of your bottle.

When you start gluing the zipper, the dog should be on the outside, the ends of its zipper are glued directly to the plastic parts from the inside. Each half should be glued in turn; to do this, the zipper must be completely unzipped.

During the gluing process, make sure that the dog moves freely along the zipper. This means that you need to leave at least a little space for it. Be careful. Do not stain your pencil case with glue during the manufacturing process!

A pencil case is not just a school attribute, but a useful thing that will help organize your work space. You can put pens, pencils, markers, erasers, rulers, sharpeners and other office supplies in it. So that you or your child can have an exclusive pencil case, you can sew it yourself.

How to sew a pencil case with your own hands?

You will need:

• Canvas, size 18x7 cm;
• 3 multi-colored cuts of the same fabric, different sizes - 18x4.5 cm; 17x5 cm and 17x6 cm;
• Fabric for lining, size 17x18.5 cm;
• Batting, size 17x18.5 cm;
• Zip 17 cm;
• Measuring tape;
• Safety pins;
• Needles and notes;
• Scissors;
• Sewing machine.

Instructions:

1. Place colored pieces of fabric and canvas next to each other on the table. Sew all the pieces together using an open seam. Then sew along all the sections using the same seam. Place a piece of fabric for the lining nearby, align them and secure with pins. Sew them along 1st side.
2. Turn the sewn fabric wrong side up and attach the zipper so that the zipper is on the right and the zipper is hidden by the fabric. The stripes on the fabric should be perpendicular to the zipper. Secure with pins, then machine sew.
3. Divide the fabric into a lining and an outer part, fold each so that the free edge touches the other, unstitched edge of the zipper. Fasten with pins, then machine sew in 3 layers. As a result, you should get a sharp cylinder with a zipper.
4. Open the zipper and turn the pencil case with the lining facing out. Place it so that there is the same amount of fabric to the left and right of the zipper. Pin the open ends of the cylinder together. Be sure to sew the zipper tape with an overlocker or zigzag stitch on a sewing machine. Trim off any excess zipper.

How to make a pencil case with your own hands?

You will need:

• Tube for toilet paper or paper towels - 2 pcs.
• Scissors;
• Cutter;
• Lightning;
• Masking tape;
• Fabric (fleece or felt);
• Threads and needles.

Instructions:

1. Cut 1 tube. Glue the 1st and most of the 2nd with masking tape. The small part of the 2nd tube will serve as a lid. Now sew a cover for your pencil case. Bright colors are suitable for the child - this will lift the mood, and the pencil case will not get lost in the baby’s backpack.
2. The cover should fit freely onto the tube. Sew a zipper into the cover and sew the edges. For the lid and bottom, cut out 2 circles from cardboard, glue pieces of fabric to them (you can have a different color than the cover itself).
3. Sew the bottom and lid into place.

Pencil cases for girls: options

Simple pencil case

You will need:

• Bright oilcloth or beautiful fabric;
• Lightning - 20 cm;
• Pins;
• Threads and needles;
• Scissors;
• Sewing machine;
• Decorative elements.

Instructions:

1. Cut 2 pieces from the main material, measuring 20x10 cm. Fold the fabric and the snake with the right sides so that the material is located on top of the zipper and carefully align the edges. Sew the zipper and fabric with a temporary stitch so that it is convenient to sew on a machine. Using a machine, sew along the basting without touching it. Do exactly the same manipulation with the other piece.
2. Unzip and stitch the pencil case along all edges. Turn it inside out and close the zipper. The finished pencil case can be decorated with funny figures, beads and flowers.

Beautiful pencil case for a girl

You will need:

• The main fabric for the pencil case is 38.1x43.2 cm;
• Fabric for overlays - 38.1x43.2 cm;
• Batting - 25.4x43.2 cm;
• Tourniquet - 115 cm;
• Pencil;
• Needles and threads;
• Scissors;
• Spray;
• Lightning - 40 cm.

Instructions:

1. Apply a random design to the main fabric. Make sure that the applied contours can be easily washed off. Fasten the fabric with the batting and quilt along the marked contours. Wash off the contours with a spray bottle.
2. Now you can create a frame for the zipper. Make stoppers, stitch the main fabric and lining. Sew the face of the stopper to the back of the fastener frame. Treat the edges of the pencil case with a beautiful rope.
3. Make cuts on the folds - this is necessary so that the fabric does not bulge. Sew the outer and inner parts of the pencil case and the lining. Sew them face to face so that no seams are visible. Turn out the pencil case.
4. Pin and stitch 1 side. Finish the second one in the same way, leaving an unstitched section. Turn it inside out and sew up the hole with a hidden stitch. The finished pencil case can be decorated with flowers or beads.

DIY pencil case: photo

Handmade is a fashion trend that has been gaining momentum lately. A pencil case is a stylish accessory that every student needs. It is not difficult to sew, and the process of making it can become an exciting game, especially if you involve your child in it. Let him talk about his desires, choose the fabric he likes, or simply think through the design.

Here you will find the most interesting pencil cases that you can take with you to school, on the road or use at home, where the pencils will be neatly folded in one place.

Pencil case made from a plastic container

You will need:

A suitable container with a lid (this can be either a food container, a juice/water container or a liquid soap container)

PVA glue

Decorative paper (or thick construction/wrapping paper).

1. Cut the required piece from colored paper.

2. Using a brush, apply PVA glue to the container.

3. Glue a piece of colored paper and, while the glue is still wet, adjust it so that everything is even.

The pencil case is ready, but you can decorate it with glitter, stickers and other details.

How to make a pencil case for school from felt

You will need:

A piece of felt of the desired size (its width should be greater than the length of the pencil)

Stationery knife

Pen or marker

Ruler

Photo instructions:

Video instruction:

Beautiful DIY pencil case

You will need:

Colored tape or some washi tape

Any case or container in which pencils are placed (a ziplock bag, a case for swimming glasses or regular goggles).

With various rolls of colored tape and scissors, you can decorate any container or bag.

Use your imagination to create a beautiful pattern.

How to make a leather pencil case with your own hands

You will need:

A piece of genuine leather, large enough to fit several pencils or pens

* If you do not have genuine leather, you can use artificial leather, thick felt, or any other suitable material.

Awl or hole punch

Scissors

Ruler

1. Make the necessary markings and cut out the required piece from the leather.

2. Using a hole punch or awl, make holes as shown in the image.

3. Insert a string through the holes and tie a knot.

DIY pencil case made of fabric: pocket

You will need:

Notebook with thick cover

Pocket from an old shirt or T-shirt

Thread and needle

Button

PVA glue

Scissors.

1. Cut a pocket from an old shirt or T-shirt. You only need the top of the pocket.

2. Trim the corners as shown in the image.

3. You can use red thread to decorate your pocket.

4. Sew a button to the pocket.

5. Bend the pocket - the left and right sides need to be bent, as shown in the image - and connect the bent parts with a thread and a needle. However, if you want to maintain the width of the pocket, then you can skip this point.

6. Sew the pocket to the notebook. You can use PVA glue to make the pocket stick better.

How to make a pencil case with your own hands that does not require sewing or sewing

You will need:

Sheet foam (porous elastic) - in this example, 2 sheets were used measuring 12 x 17 cm and 7 x 17 cm respectively

Colored tape (colored adhesive tape)

Velcro

Hole punch or utility knife

Ribbon (braid).

1. Lay out several sheets of foam rubber (sheet foam) on the table. The large leaf will fold over the small leaf.

2. Use colored tape to secure the ends of the sheets. Trim off the excess.

3. Using a hole punch or utility knife, make several holes in the top of the large sheet (which you folded) and thread the ribbon through the holes.

4. Attach Velcro - you can use PVA glue, superglue or double-sided tape.

Pencil case from DVD case

You will need:

DVD case

Cardboard (thicker or regular)

Scissors or utility knife

PVA glue

Super glue

A special mat or board on which you can cut without damaging the table or other surface.

1. First you need to cut off the part of the case that holds the disc. To do this, you need to open the case and place it on a special mat or board. Use a utility knife to cut out the circle.

2. Cut out a rectangle from thick cardboard that will fit inside the case.

3. Take the fabric, cut the desired piece to wrap the cardboard with. Use glue to secure the fabric to a piece of cardboard.

4. Cut another piece of fabric (preferably thick) to make a pocket for pencils. Measure so that the fabric can be folded in half and its height is at least as high as the cardboard.

You can iron the fabric folded for the pocket.

5. Place the wrapped cardstock on the table, pattern side up, place some pencils on top of it, and place pocket fabric on top.

Wrap the pocket fabric around the pencils and secure the ends behind the cardboard with glue. You can also use duct tape.

6. Glue the cardboard with the pocket to the case as shown in the image.

7. You can print out a colored cover for the case so that by inserting it you can cover the hole in the case.

You can also create several compartments in your pencil case by stitching the pocket fabric.

Pencil case for pens and pencils made of zippers (photo instructions)

A pencil case is a useful thing if you need to organize your work space. Pens, pencils, markers, erasers and other necessary items are not scattered on the table and are not lost in the bag.

And school pencil cases are just as necessary for children as notebooks or a diary.

But those sold in stores are often too bulky, with ugly, monotonous designs (pencil cases for girls are with pink fairies, for boys - gloomy dark blue cars, and there are almost no alternatives!), and some of them are sometimes dangerous - Poorly made plastic edges or the protruding tip of the fishing line can cause scratches.

Trying to buy something so necessary for school turns into torture. But you can sew one yourself with the help of the videos presented in this article - it will take very little time, the soft fabric will never cause scratches, and the choice of its color depends only on you.

How to make an original pencil case with your own hands? In this step-by-step photo tutorial, you'll see that it only takes five steps.

You will need:

- piece of canvas (18 x 7 cm);

- three multi-colored cuts of the same fabric - you can take any, for example, linen:

• the first of them is 18 x 4.8 cm;
• second - 17 x 5 cm;
• third - 17 x 5.8 cm;

- fabric for the lining - 17 x 18.5 cm (if the lining is not always visible, this still does not mean that it should be boring and monochromatic, a good thing is beautiful from all sides);

- batting cut 17 x 18.5 cm;

- zipper at least 17 cm long;

- measuring tape;

- safety pins;

- sewing machine.

The finished pencil case, as in the photo, according to these instructions should be 9 x 17 cm in size. Please read all the instructions carefully before you start cutting. Even a children's pencil case cannot be sewn with your own hands without careful measurements.

Making a children's pencil case for school with your own hands: step-by-step description

So, let’s start sewing our own school pencil case for pens, pencils and other stationery.

1. First we create the external part - this is the most creative moment. Place colored pieces of fabric and canvas next to each other - this is what your pencil case will look like from the outside (see photo). Then sew all the pieces lengthwise with an open seam.

2. Place a piece of fabric next to it intended for lining. The size of the sewn fabric on the “outer” side must exactly match the lining. Align them and pin them together, then sew along one side.

3. Turn the sewn fabric wrong side up and attach the zipper so that the zipper is on the right, and the zipper itself is completely hidden by the fabric (see photo). The stripes on the fabric should be perpendicular to the zipper. Fasten with pins, and then sew on a machine through all three resulting layers (fabric, lining, zipper - along its “right” side, when viewed from the side of the zipper).

4. “Separate” the fabric into a lining and an outer part. Fold each of them so that the free edge touches the other, unstitched edge of the zipper - respectively, on both sides. Pin together and then machine sew (all three layers again). You should end up with an open cylinder of fabric with a zipper.

5. Open the zipper and turn your pencil case with the lining facing out. Place it so that there is an equal amount of fabric to the right and left of the zipper, and pin the open ends of this “cylinder” with pins. Using an overlocker or zigzag on a machine, be sure to also stitch the zipper tape.

Cut off the excess part of the zipper, if there is any (the end without the lock; it is on this side, if you did everything correctly, that there should be an extra piece of tape left - if, of course, it was originally longer than 17 cm).

Since the pencil case is made of fabric without any frame, it is flat and takes up exactly as much space as the things in it take up. But it can also be quite roomy. Ideal item for a school backpack!

Video: how to make a pencil case with your own hands