How to decorate cars for a wedding. Wedding decorations on the car with your own hands. How to decorate a wedding car with ribbons, flowers, balloons, bow, tulle, hearts, rings: photo. How to decorate a wedding car with fresh flowers

When it comes to decorating wedding cars, the first thing that comes to mind for newlyweds is to hang balloons, wedding rings and artificial flowers on cars. This is due to the fact that this method is the most popular, but that is why it should not be used, because such cars rarely look really beautiful.

It is better to choose a fabric decor that will look restrained and sophisticated, hinting that the newlyweds spent time and applied their imagination to create it. Satin or tulle ribbons for a car for a wedding are the most common, because of their appearance, which harmonizes well with the theme of the holiday.

There are many ways to use satin ribbons to decorate a car, it all depends on the style in which the wedding is organized, so you must first decide which places will be decorated, and then choose the most suitable colors.

1. On the hood, place one or two oblique tapes that go from the radiator grille to the side mirrors. Depending on the additional decor in the form of figures or rings, the car can look both strict and elegant, as well as cute or romantic.
2. On the side mirrors or handles of cars - small ribbons of different colors will look good there.
3. On the roof of the car, around figurines with newlyweds or rings.
4. On the trunk and rear bumper: it is very beautiful if the ends of the ribbons flutter freely. But at the same time, it is necessary to monitor their length so that they do not interfere with other participants. traffic.

Ribbon decorations for cars of newlyweds and witnesses, as well as guests, are different.

For the Newlyweds, they make a pair or mirror decor - so that it is immediately clear that it is these cars that are carrying the bride and groom.

For witnesses, the width or number of fabrics is less, there are no other decorative elements, only floral arrangements are allowed.

And for the rest of the invitees, it is necessary to make a completely neutral harness on the hood or fluttering ribbons.

How to make a ribbon on a wedding car with your own hands - a master class

Often, newlyweds do not want to spend money on wedding car decoration, because such decorations will be needed only once, and then they will gather dust.

Now for newlyweds it has ceased to be such a difficulty, because you can rent a harness - the choice of wedding agencies is quite large. The only drawback is that this decoration has been at many weddings, and if the appearance remained good, then it definitely cannot be called unique.

Therefore, if the groom, bride or organizers of the holiday want to get an inexpensive, but exclusive decoration of the wedding procession, then you can create it with your own hands. To make decorative elements from ribbons, you need to know which car the newlyweds will drive. After all, the size of the hood and body is different for different models.

If the exact parameters are not known, then you will have to make ribbons with a margin, and cut off the excess on the day of decoration.

Necessary materials:

• 8 m ribbon 10 cm wide, or 2 multi-colored ribbons 5 cm each;
• sewing machine;
• ball pen;
• 3 m of fabric tape, contrasting to the main piece of material, width 1–1.5 cm;
• 3 elastic bands 1 cm wide and 10 cm long;
• scissors;
• sewing threads.

First you need to fix an elastic band on the main tape, which will hold the decoration on the hood, as in the photo.

To do this, apply 1-2 cm of stretch to the end of the fabric and pass the sewing machine back and forth several times.

On the decorative tape, it is necessary to mark the middle. To do this, it is folded in half, and if possible, carefully carried out with a pen. A decorative ribbon is placed on the fastener, which will go along the entire length of the decoration, and also sewn on.

When all the preparatory stages are ready, waves begin to form.

To do this, 3 cm recede from the edge and pinch the main fabric. It should rise above the surface by about 1–2 cm. After that, they lay it with the top towards themselves and smooth the decorative tape on top. Now you can sew.

To form the next wave, it is necessary that from the top of the previous one to the bottom of the next one there should be the same length as the height of the wave. Then the whole tape will turn out uniform and beautiful.

Continue folding and sewing until you reach the middle of the decorative tape. There it is necessary to change the order of folding and bend the waves away from you. After that, they also continue to sew further until 3–4 cm remain until the end of the tape, into which it is necessary to attach an elastic band and fasten the entire structure.

It is important that there is a correct indent in the middle. It must be doubled, so that up to the mark on each side there is one ordinary segment of empty space.

When the entire ribbon is sewn, the last elastic band is tied in the middle of it, which will fasten the decoration to the radiator. Sometimes bows, flowers or figurines are installed at this place, for which fasteners are needed more powerful, from a silk tie 2 cm wide.

After everything is stitched and tied, the tape can be installed on the hood. It will diverge from the grille towards the side mirrors.

If you want to make the tape multi-colored, then the same actions are performed with pieces of fabric previously sewn together.

How to fix the tape on the car - easy ways

In addition, to select or create decorations, you also need to attach them to the car. This is a very important stage in the preparation of the wedding procession, because all the decor must be securely installed.

If this is not done, the most harmless thing that can happen is that he will simply fall on the road. But even this case with three-dimensional figures can be dangerous. With ribbons or fabric, newlyweds need to be more careful, because a piece of fabric that has flown away from the car can fall on the windshield behind a moving car, which will cause loss of control and an accident.

How to attach tapes:

1. The easiest way is to fix small ribbons on the mirrors or handles of the car, you can also decorate the rear wiper with them. It is enough just to tie them tightly, or to fasten them with a stapler for greater reliability. This is especially true when the ribbons hold up another decorative element.
2. The second most difficult is the fastening of the tapes on the hood. To do this, you only need to lift the cover, and fasten the ends of the tape next to the windshield. If there are protrusions on the inside and the ability to fix the elastic band, then this is done immediately without closing the lid. If not, then the ribbon is threaded through the radiator grill and tied tightly, while it is important to cut or hide the ends under the decor so that they do not spoil the appearance.
3. If the tape is light and is passed over a large area of ​​the car so that it does not move, both ends are firmly fixed. When one of the ends must be left free, strips of double-sided tape are used along the entire length of the tape.

Before using any of the methods, you need to make sure that pieces of fabric do not fall into moving or heating parts of the car. If you are going to use adhesive tape, then you need to check in an inconspicuous place how it is cleaned, whether it leaves stains on the paint.

Tulle jewelry

If the newlyweds want a more airy texture from the fabric, then tulle is ideal. It is translucent, which allows it to be stacked in several layers, which will help to make a stronger accent in places.

Tulle can act as the main means for decorating a car, or be just a nice addition - it all depends on the imagination of the newlyweds.

How to decorate a car with tulle:

1. Place a strip of fabric on the hood, fixing it at the top and bottom. Due to the fact that the material does not wrinkle and keeps its shape, it is most often laid in small folds. It looks most advantageous when the decorators used two colors of tulle, which stand out most strongly against the background of the car's paint.
2. A voluminous tulle bow placed on the roof or the back of the car looks beautiful. It is also made of fabric in two shades, and is complemented by a satin ribbon that runs along the entire length of the roof. In order to make it look more advantageous, a bouquet of voluminous artificial inflorescences is placed in the core.
3. If all the decorations on the hood are made of other materials or are small in size, then you can beautifully decorate the side doors with tulle. The material is so thin that it attaches well and does not harm the rubber gaskets on the door. But to make everything look very unusual, you need to create small bows of satin or tulle, which will be strung one at a time on each strip. If possible, you can use a more sophisticated option - special buckles.
4. Use small tulle ribbons attached obliquely to the hood, and special stickers or magnets are applied to the side surfaces. A white car looks very unusual, decorated with burgundy abstract patterns and ribbons of the same color.

When only tulle is used, there is no need for an additional lining to protect the paint.

But if other, harder materials are present, then care should be taken to create a protective screen that will not be visible under the main decorative element. To do this, you can use a piece of dense fabric or a polyethylene substrate, which is sold in hardware stores.

This video will show you how to sew a wedding ribbon on your car yourself:

Decorating cars with ribbons or fabric is no longer considered a luxury - it is a common and beautiful way inform other road users that the newlyweds are driving inside. In addition, such cars cheer up everyone who sees them, so it is important to pay attention to even such an insignificant item of the program. How would you decorate the body of your wedding car?

A wedding is an expensive event, so many people try to relieve the budget by doing something with their own hands. For example, to make decorations for a wedding car. We offer examples of jewelry and tips for creating and attaching them.

DIY wedding rings on the car, ideas

Option 1

Material:

• plastic pipe
• Artificial flowers
• foam plate
• Golden ribbons (gold decorative tape) or fabric
• Satin ribbons
• Thread, needle, scissors
• Scotch
• Base fabric

Progress:

1. Hose corrugated pipe cut into two pieces. Make two rings by securing the pipe segments with tape.
2. Wrap the surface with tape to remove bumps from the surface.
3. Decorate the top with golden decorative tape or golden ribbon. In the absence of adhesive tape, golden fabric is suitable.
4. Secure the rings together with tape. Put on a foam pedestal, making small holes in it and stretching ribbons through them.
5. Cover the foam base with a beautiful fabric, sew.
6. Pull wide satin ribbons under the foam and rings, tie in the place where they are fastened with the foam. With the help of these tapes, the structure will be fixed on the car.
7. Decorate the rings with flowers and other decorations. Cut off the stems of the flowers and insert into the foam. Secure with a hot glue gun to keep the flowers from being blown away by the wind.
8. You can insert neodymium magnets into the foam, for a stronger fixation on the machine.

Option 2

1. Take the wire, glue it with paper, which you secure with tape (for volume).
2. Top with a shiny golden fabric, attach to a frame made of foam rubber or foam.
3. To secure to the car, attach to the frame of the tape.

How to make a decoration for a wedding car, ideas from a photo

Butterflies on suckers

hats

Material:

• Whatman - 3 sheets
• PVA glue
• Glue gun
• Hat fabric
• White ribbon - 3 meters
• Cardboard
• Newspaper
• thick ribbon

Progress:

1. Cut out two circles from whatman paper, 37 and 26 cm in diameter, leave a margin for fastening. Fasten the two remaining pieces of drawing paper together in the form of a tube with a glue gun. Attach the circles that will be the top and bottom of the hat.
2. Dilute the PVA glue with water, tear the newspaper finely. Soak it in the solution and stick it on the base, according to the papier-mâché principle. Let dry overnight.
3. Sew a cover from the fabric, cutting out a circle 28 cm in diameter, then two strips, one - 12 cm wide and 1.5 m long, the second - according to the shape of our base, slightly letting on the seams. Sew the main part first, then add a circle. Carefully stitch the edges of the circle.
4. Attach the cover to the base with glue.
5. Decorate the hat with ribbons.
6. Attach special magnets or suction cups to the hat so that it does not fall off the car.

Bow

1. Take tulle (a large amount), tie it randomly to make a big bow. Can be tied with ribbon. Decorate to your liking.
2. Tape it to the car.

Decorating a wedding car with flowers, ideas with explanation

Flowers on suction cups

1. Purchase artificial flowers from the store, trim the stems if necessary.
2. Attach suction cups or special magnets to the flowers to secure them to the car.

flower composition

Material:

• Artificial flowers, leaves
• Tulle or mesh
• Ribbons
• Cardboard
• Scotch

Progress:

1. Make a frame for the cardboard composition by cutting out a circle.
2. Fix the flowers on it by inserting decorative greenery and tulle envelopes between the flowers.
3. Fix everything with adhesive tape and decorate with a tulle skirt.
4. Attach the composition to the car with tape, or stretch the tape through the frame and pull it tightly around the hood.

Decoration of flowers and tulle

Material:

• tulle
• artificial flowers
• Ribbons
• Scissors
• Elastic band underwear
• Glue gun

Progress:

1. Cut a strip of tulle 25 cm wide.
2. Cut three 12-inch pieces of elastic to secure the embellishments.
3. Tie elastic bands to the ends of the tulle.
4. Cut several pieces of green ribbon, tie on the fabric at regular intervals.
5. Attach artificial flowers with a glue gun to the places that are tied with ribbons.

Wedding car decoration with ribbons, ideas with photos

ribbon and flowers

1. Get a tape that is twice the length of the hood and 5 cm wide.
2. Pull it through the V-shaped grille, secure it under the hood with a clothesline or tape.
3. Sew artificial flowers onto the ribbon. You can make your own flowers or organza bows.
4. Tie pieces of ribbon between the flowers so that they flutter when you travel.

puffy ribbon

1. Sew an elastic band to the ribbon and gather it a little to make the ribbon "accordion" for splendor.
2. Attach to the hood by adding some other decorative element (balls, stickers).

Heart from paper napkins on ribbons

1. Cut out a blank from cardboard - a heart, as well as a strip of 6 cm. Bend the strip in half.
   
2. On one side of the fold, cut the cardboard with scissors, attach this strip to the heart on adhesive tape.
   
3. Take a folded napkin, cut out a circle. Fix the middle with a stapler.
   
4. Flatten each layer of napkin with your fingers to make a flower.
   
5. Glue the roses to the base, fasten the base to two ribbons.
   

Decorations on the hood of a car, ideas from a photo

Decorations on the handles of wedding cars, ideas from a photo

Decorations on the mirror of wedding cars, photo

How to attach decorations to a wedding car

1. On the roof. Mount massive decorations on suction cups and ribbons. Tie the tapes under the roof of the car, they are also held by the side axes of the doors. Fasten the decoration to additional ribbons that should be attached under the hood of the car. Suction cups should be present on the bottom of the decoration for stability.
2. Mirror decorations. Fastened with elastic bands or ties. Jewelry should not cover the mirrors so as not to interfere with the driver's view.
3. Radiator decorations. Tied with ties.
4. On the back glass. Attached with suction cups.
5. Nets on the hood and tape. They are fixed with special tapes passing under the hood.
6. Small light decorations on the hood(flowers, butterflies) are attached using special neodymium magnets or suction cups.

DIY wedding car decoration video

The main thing in decorations on a car is a reliable fastening. Be aware of weather conditions such as rain and wind. Play it safe by securing heavy jewelry not only with ribbons, but also with additional suction cups or magnets.

Read our tips and see photos to beautifully decorate your wedding car with your own hands. The motorcade is the face of the wedding, a common backdrop for commemorative photographs, its “outfit” should be as good as the suits of the bride and groom.

There are many ways to decorate a car for a wedding: ribbons, flowers, bows, soft toys, stickers, balloons, decorations cut out of cardboard or paper are used. We will describe all the methods in detail below, but for now - five main tips that will come in handy if you do everything yourself.

1. The more compact the decoration - the less risk that it will be blown away by the wind and the less effort you need to spend to fix it. It is better to make jewelry wider and shorter.

2. It is important that the decor of the wedding car, especially the main car in which the bride and groom sit, matches the chosen colors of the celebration. The photo below shows that the ribbons decorating the car are matched to the ribbons that decorate the wedding hall.

Photo: @SAM Cheong - flickr.com

3. When creating jewelry for a wedding car with your own hands, it is important not to overdo it and maintain a sense of proportion and taste. From a large number of details, eyes run wide, as a result, the decor of the car, as in the photo below, looks tasteless.

Photo: @Geoff Stearns - flickr.com

4. It is desirable that all cars of the wedding procession be decorated in the same style. All cars, in addition to the main one, can be decorated in exactly the same way. This is not a competition “Who will decorate the car better”, but a wedding, so everything should obey the same plan. But it is not necessary that everything be the same: you can use, for example, ribbons of the same color, or tie ribbons of different colors in the same way.

Photo: @斯克爾影像館 - flickr.com

5. Consider the color and style of the car. If a we are talking about a flashy car, such as a rare retro car, then the decorations should be minimal, the car itself will attract attention. When it comes to color, it's important to use contrast. Jewelry of almost any color will suit a white car. Against a dark background, pale colors will be lost, especially if the decorations are small.

Photo: @Mack Male - flickr.com

How to decorate your wedding car with balloons

Oddly enough, making a beautiful balloon decoration is quite difficult, you need to show your imagination. Bundles of balls on mirrors look boring and banal. Either ribbons and compositions from small round balls of different colors look interesting, or compositions from balloons and other elements, as in the photo below.

Photo: @Jeremy Weate - flickr.com

In order to make a composition of balls, for example, animal figures or flowers, you will need a special pump, balls of different shapes and some dexterity. The video shows how to decorate a wedding car with your own hands with balloons in the shape of double hearts.

This video shows how to make a lamb and a sheep out of balls. Cars are often decorated soft toys, however, ball figures are made extremely rarely - a great opportunity to stand out. Sheep will be especially relevant at weddings in 2015, which is the year of the sheep.

Ball figures have one important plus: they are easy to fix on a car using magnets or double-sided tape.

How to decorate a wedding car with fresh flowers

Fresh flowers are a classic of the genre, such decor always looks solemn and bright. There is only one minus - fresh flowers are now expensive.

Photo: @Jakob Montrasio - flickr.com

But there are a lot of variations of floral decorations. Some of them are economical and do not require the use of expensive colors. The original and fairly economical version of car decoration is shown in the photo below - this is a flower "skirt".

Photo: @Cristiano Betta - flickr.com

A good idea is shown in the photo - you can decorate a car for a wedding with flowers from the inside: the decor is clearly visible, it will not be blown away by the wind, and besides, the car smells great without any Christmas trees.

Photo: @Andrew - flickr.com

Another economical, but bright option: few flowers are used, but it looks interesting - like a cake decorated with cream around the edges. It is important that a contrasting combination of car colors and decor is used.

Photo: @David Schroeter - flickr.com

As a rule, floral decorations are combined with fabric decor. This helps, on the one hand, to diversify decorations, and, on the other hand, to save flower material. Here is an example of a classic flower and ribbon decoration:

Photo: @Connie Ma - flickr.com

How to decorate a wedding car with tulle

It is quite simple to make tulle decorations for the car with your own hands - this is a light mesh fabric, from which ribbons and voluminous voluminous bows are usually made. The video below shows how to make beautiful pompoms out of tulle, which, in combination with ribbons and flowers, will be an excellent decoration for the bride and groom's car.

You can decorate a car for a wedding with ribbons made from satin and other fabrics. Artificial bouquets made of fabric look interesting: this is an original, stylish and, moreover, budget solution.

​
Photo: @Steven Isaacson - flickr.com

It is important that ribbons and other decorations do not block the driver's view. Usually they are fixed under the hood of the car. It is also convenient to use double-sided tape: it can leave traces of glue on the car, but they can be easily washed off with warm water.

How to beautifully decorate a wedding car with your own hands: photo

There are many ways to decorate a car for a wedding in an original way. This is especially important if the wedding is themed. However, for a classic celebration, you will have to try. Much depends on the car itself: if we are talking about a deliberately cheap car, it is worth decorating it as ridiculous and fun as possible. Here, for example, is an unusual car of the bride and groom. Sponge Bob is lucky!

Photo: @Alexander Lyubavin - flickr.com

With exquisite and expensive cars, comic decor usually looks bad. However, cute decorations, such as stuffed bears or figures of the bride and groom, are fine.

Photo: @Greengirl 24 - flickr.com

Floral decorations are a classic, however, you can make it very unusual by using rare flowers. Sunflowers, as in the photo below, for example, you will not meet every day, while the decoration turns out to be sunny and joyful.

Photo: @KeWynn Lee - flickr.com

The photo shows what can be done using only scissors and paper. Hawaiian themed wedding.

Photo: @ilovebutter - flickr.com

In fact, you can create quite a lot of interesting decorations using self-adhesive paper in different colors and textures. For example, place silhouettes of the bride and groom, hearts, doves and other symbolic figures on the hood. True, you have to tinker to remove this decor.

Decoration does not have to be very bright and catchy in order to be beautiful and original. A good example is in the photo below. True, the car itself is important here, and not its decor.

Photo: @anna Hanks - flickr.com

A heart is a classic car decoration for a wedding. You can make it more original by adding the figures of the bride and groom.

Photo: @Calbee Chen - flickr.com

Such decoration is placed either on the grille or on the hood.

Photo: @CMY Kane - flickr.com

Most agencies that provide transport for a wedding offer to include in the rental price the original decoration of the car by professional florists and designers.

As a rule, this is quite an expensive pleasure.

Therefore, if you have a share of imagination and a creative approach, you can cope on your own.

1. Check in transport company is it possible to decorate a rented car, as sometimes it is forbidden to do this due to the high cost of car coverage.
2. Try to choose cars in the same color scheme for the wedding procession so that when driving down the street they represent a harmonious line.
3. For cars of bright colors, it is preferable to choose calm and non-provocative colors in the design.
4. One of the traditional design decisions is that light accessories look perfect on a dark background and vice versa.
5. Observe symmetry in order to create a single ensemble.
6. Take care of the practicality of fasteners and parts, as it can be unsafe to detach them while driving.

If you follow these simple rules, then you are provided not only with an outwardly pleasant design of the car, but also with its reliability.

flower arrangements

Real and artificial flowers are a great option for decorating a wedding car, as they look especially romantic and festive.
To decorate the car with flowers you will need:

• A variety of plants and compositions from them, which should be ordered in advance at the floristry.
• specialized fasteners on suction cups;
• multi-colored dense satin ribbons;
• braid or linen gum;
• buttonholes.

When decorating a car with fresh flowers, do not forget that their freshness depends on weather conditions. Therefore, ask the florists to treat them with special compounds before picking them up from the store.

Primarily, start decorating the hood. First, choose the largest flower arrangement that you plan to focus on. Fix it in the middle part or diagonally of the hood.

Sew an elastic band or braid to the ribbons so that they hold tightly on the parts of the machine. Place an odd number of tapes on one side of the trunk.

Also you can tie bows on the protruding parts. Decorate the handles with boutonnieres(how to make them with your own hands), but at the same time make sure that the fasteners are secure.

On the roof of a car or a radiator grill, two rings made of small natural flowers will look spectacular.

The approximate cost of decorating a car with flowers can vary from 4,000 to 7,000 thousand rubles.. It depends on the variety of flowers and the number of decorative elements.

Balloons

The most economical option for wedding car decoration - balloons. The stationery market offers a variety of shapes, colors and quality materials.
If your choice fell on the balls, then prepare in advance:

• garlands of balloons (helium, colored, luminous);
• thin and elastic braid;
• automotive tape.

Be sure to pay attention to the quality of the latex from which the balloons are made. The tighter it is, the better.

Choose no more than four colors, as otherwise the decor will look ridiculous and unattractive.

Garlands are attached to the roof, and individual balls are tied to the handles of the car with a braid. Additionally, you can put a tape on the hood or attach a fabric heart to the trunk.

The benefits of decorating a car with balloons are in a cost that will not exceed 3000 rubles.

Toys

Creative design of wedding cars is a trend of the last 10 years. Romantic natures are ideally suited as accessories for their favorite toys.

Traditionally, porcelain dolls of the bride and groom or teddy bears serve as the center of the composition..
Fastening to the radiator grille is made by means of wide bands and elastic wire.

Stretch a transparent mesh over the hood of the car, on which place postcards made using the scrapbooking technique. Write memorable dates or wishes for each other inside each card.

Photo

Pictures from your personal archive will be great accessories when you decorate your car. It looks original and requires a minimum of preparation.
The following is required:

• high-quality photographs of different sizes (color or black and white);
• acrylic varnish for paper coating;
• brushes of medium size;
• automotive tape;
• threads with large beads.

Think ahead about the location of the pictures to be placed on the hood. Their shape can be round, square or heart-shaped.

Photos are glued to the car adhesive tape around the entire perimeter. To keep their appearance for a long time, you should pre-treat each picture with acrylic varnish and leave to dry completely.

On the roof of the car, tightly fasten threads with large beads, thanks to which you can create a unique pattern.

Photo editing is minimal., since the most important decor elements are stored in your photo album.

The cortege is an integral part of the wedding ceremony. If invitation cards are a calling card for invited guests, then a string of wedding cars is a calling card for everyone who sees it. The most beautiful, of course, should be the car in which the newlyweds will go. It is usually decorated last and in a hurry. And it would not hurt to approach this matter with all responsibility. A master class on decorating a car with your own hands for a wedding will help you quickly understand this matter.

Economical and simple

The most economical and easiest way out is balloons.

To do this, you need to purchase balloons, inflate them and fasten them in the desired composition with beautiful ribbons. Balls can be grouped into pyramids and garlands, formed into hearts and rings - it depends on the number of balls and on the imagination of those who decorate the car.

Note! You need to fasten them tightly, otherwise, with a quick movement, you can lose the whole outfit.

Space for imagination

The most common way to decorate a car for a wedding is to decorate with cloth and bows.

Two colors of fabric on the hood is a good solution:

Sew one big bow:

Make a heart out of fabric

Assemble the fabric and ribbons into an assembly:

There are a lot of options.

In order not to be considered tasteless, you need to remember: if a big bow is made, then it should be one. There may be several small ones.

Ideally, all cars of the wedding procession should be decorated in the same style. If the car of the bride and groom has a huge bow, then the rest should also have smaller copies of the main decoration.

bright flowers

Decorating wedding cars with flowers is rightfully considered the highest priority.